Smallest.space main v0.2.0
kevin-mitchell·smallest-space-hardware·pcbs/main/v0.2.0/esp32_primary_board_v2.kicad_pcb
About the Smallest.space main v0.2.0 PCB
Smallest.space main v0.2.0 is an open source ESP32 PCB design by kevin-mitchell, published on GitHub. It is a 4-layer board measuring 44.3 × 42 mm, with 24 components from 19 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LD39200PUR. By type, the board carries 9 resistors, 5 capacitors, 4 diodes, 2 ICs, 2 connectors and 2 switches.
From the project
smallest.space hardware related project files
Main components on the Smallest.space main v0.2.0
Smallest.space main v0.2.0 bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | LD39200PUR | SON95P300X300X100-7N | U4 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | USB4085-GF-A_REVB | GCT_USB4085-GF-A_REVB | J3 |
| 1 | BOOT | SW_SPST_PTS810 | SW1 |
| 1 | RESET | SW_SPST_PTS810 | SW2 |
| 1 | ENABLED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | DISABLED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | ESDA6V1BC6 | SOT-23-6 | D4 |
| 1 | Power | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 2 | 10µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 3 | 0.1µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5 |
| 1 | 5K6Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1KΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10KΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5KΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 2 | 5K1Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8 |
| 2 | 56Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 1 | 100Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Smallest.space main v0.2.0 design files
The KiCad project lives in the kevin-mitchell/smallest-space-hardware repository on GitHub; these links point at the commit this page was built from.
Smallest.space main v0.2.0: common questions
What microcontroller does the Smallest.space main v0.2.0 use?
The Smallest.space main v0.2.0 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Smallest.space main v0.2.0 PCB?
The Smallest.space main v0.2.0 measures 44.3 × 42 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Smallest.space main v0.2.0?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smallest.space main v0.2.0 design files?
From the kevin-mitchell/smallest-space-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smallest.space main v0.2.0 design in my own project?
The repository has no license, so all rights stay with kevin-mitchell. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smallest.space main v0.2.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in smallest-space-hardware
Earlier revisions in the repo: esp32_primary_board_v0.3.1, esp32_primary_board_v0.3.0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k