Smallest.space web radio v0.0.1

kevin-mitchell·smallest-space-hardware·pcbs/web-radio/???/esp32_web_radio_v0.0.2.kicad_pcb

Smallest.space web radio v0.0.1 PCB layout, top view — open source ESP32 board by kevin-mitchell

About the Smallest.space web radio v0.0.1 PCB

Smallest.space web radio v0.0.1 is an open source ESP32 PCB design by kevin-mitchell, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 53 components from 26 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP2127K-1.8, LD39200PUR and TLV320DAC3100. By type, the board carries 22 capacitors, 17 resistors, 5 switches, 4 ICs, 3 diodes and 2 connectors.

It belongs with the rf & radio designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

smallest.space hardware related project files

Main components on the Smallest.space web radio v0.0.1

Smallest.space web radio v0.0.1 bill of materials (BOM)

53 components, 26 distinct parts.

QtyPartRefs
1
AP2127K-1.8
U1
1
LD39200PUR
U2
1
TLV320DAC3100
U3
1
ESP32-S3-WROOM-1
U4
1
USB4085-GF-A_REVB
J1
1
Conn_01x02_Pin
J3
1
VOLUME_UP
SW2
1
VOLUME_DOWN
SW3
1
MUTE
SW4
1
RESET
SW5
1
BOOT
SW6
1
Power
D1
1
ESDA6V1BC6
D2
1
STATUS
D3
2
100µF
C1, C2
2
10µF
C3, C22
4
22µF
C4, C10, C15, C17
2
10µF
C5, C8
6
0.1µF
C6, C7, C9, C14, C16, C19
6
0.1µF
C11, C12, C13, C18, C20, C21
Show 6 more
QtyPartRefs
1
4K7Ω
R1
2
5K1Ω
R2, R3
3
1KΩ
R4, R6, R10
1
5K6Ω
R5
9
10KΩ
R7, R8, R9, R11, R12, R13, R14, R16 +1
1
5KΩ
R15

Smallest.space web radio v0.0.1 design files

The KiCad project lives in the kevin-mitchell/smallest-space-hardware repository on GitHub; these links point at the commit this page was built from.

Smallest.space web radio v0.0.1: common questions

What microcontroller does the Smallest.space web radio v0.0.1 use?

The Smallest.space web radio v0.0.1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Smallest.space web radio v0.0.1 PCB?

The Smallest.space web radio v0.0.1 measures 60 × 60 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the Smallest.space web radio v0.0.1?

53 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Smallest.space web radio v0.0.1 design files?

From the kevin-mitchell/smallest-space-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Smallest.space web radio v0.0.1 design in my own project?

The repository has no license, so all rights stay with kevin-mitchell. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smallest.space web radio v0.0.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in smallest-space-hardware

Earlier revisions in the repo: esp32_web_radio_v0.0.1

Similar boards