ICED-R

kiibohd·pcb·ICED - Right/ICEDRight.kicad_pcb

ICED-R PCB layout, top view — open source NXP board by kiibohd

About the ICED-R PCB

ICED-R is an open source NXP PCB design by kiibohd, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 175.4 × 145 mm, with 163 components from 34 distinct parts.

Its main chip is the MK20DX256VLH7, from the NXP family. Other key parts include the TS3DS10224RUKR. By type, the board carries 77 diodes, 39 switches, 17 capacitors, 15 resistors, 4 connectors and 2 ICs.

It belongs with the keyboards designs in this gallery.

From the project

PCB and PCB related bits

PCB and PCB Related Bits ========================

In general kicad is used for projects. A project will be explicit if another program is required to view.

Kira, 2019-01-17 K-Type, 2017-11-02 WhiteFox, 2016-06-11 IC60 (Infinity 60% Keyboard, 2016-20-07) ICED Left and Right (Infinity Ergodox, 2015-08-07) DPH (Model F capsense controller using teensy2++)

ICED-R, from the project README
From the project README

Main components on the ICED-R

MK20DX256VLH7TS3DS10224RUKR

ICED-R bill of materials (BOM)

163 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MK20DX256VLH7
U1
1
TS3DS10224RUKR
IS31FL3731C
U2
1
TC1264
Q1
1
NX3225SA-16.000M-STD-CSR-1
CRYSTAL
X1
1
FLASH_HDR
P1
1
USBC
P2
1
CONN_17
P3
1
USB3_AFEMALE
P4
6
>VALUE
FID1, FID2, FID3, FID4, FID5, FID6
1
NHD-C12832A1Z
LCD1
38
SW
S1, S2, S3, S4, S5, S6, S7, S8 +30
1
TAC_SWITCH
S39
38
DIODE
D1, D2, D3, D4, D5, D6, D7, D8 +30
38
LED
D39, D40, D41, D42, D43, D44, D45, D46 +30
1
LED
D77
4
JMK105BJ474KV-F
1uF
C1, C10, C15, C17
5
EMK105B7104KV-F
1uF
C2, C6, C11, C12, C16
2
JMK105BJ474KV-F
0.1uF
C3, C7
1
EEF-CX1D220R
0.1uF
C4
2
EMK105B7104KV-F
0.1uF
C5, C9
Show 14 more
QtyPartRefs
1
EMK105B7104KV-F
0.22uF
C8
2
JMK105C6225MV-F
1uF
C13, C14
2
RK73B1ETTP330J
33
R1, R2
2
RK73B1ETTP102J
4.7k
R3, R4
1
RK73B1ETTP104J
4.7k
R5
1
RK73B1ETTP104J
100
R6
1
RK73B1ETTP512J
100
R7
1
RK73B1ETTP512J
100k
R8
1
RK73B1ETTP133J
66.5
R9
1
RK73B1ETTP512J
66.5
R10
1
RK73B1ETTP512J
1k
R11
1
RK73B1ETTP102J
20k
R12
1
RK73B1ETTP102J
33
R13
2
RK73B1ETTP101J
5.1k
R14, R15

ICED-R design files

The KiCad project lives in the kiibohd/pcb repository on GitHub; these links point at the commit this page was built from.

ICED-R: common questions

What microcontroller does the ICED-R use?

The ICED-R is built around the MK20DX256VLH7, from the NXP family.

How big is the ICED-R PCB?

The ICED-R measures 175.4 × 145 mm and is 1.6002 mm thick.

How many components are on the ICED-R?

163 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ICED-R design files?

From the kiibohd/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ICED-R design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which kiibohd chose for the repository.

Can I test firmware for the ICED-R without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in pcb

Similar boards