WhiteFox

kiibohd·pcb·WhiteFox/WhiteFox.kicad_pcb

WhiteFox PCB layout, top view — open source NXP board by kiibohd

About the WhiteFox PCB

WhiteFox is an open source NXP PCB design by kiibohd, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 304.8 × 101.1 mm, with 296 components from 29 distinct parts.

Its main chip is the MK20DX256VLH7, from the NXP family. Other key parts include the MK20DX256VMC7R and IS31FL3731C-SALS2. By type, the board carries 87 switches, 87 LEDs, 73 diodes, 12 resistors, 10 capacitors and 3 ICs.

It belongs with the keyboards designs in this gallery.

From the project

PCB and PCB related bits

PCB and PCB Related Bits ========================

In general kicad is used for projects. A project will be explicit if another program is required to view.

Kira, 2019-01-17 K-Type, 2017-11-02 WhiteFox, 2016-06-11 IC60 (Infinity 60% Keyboard, 2016-20-07) ICED Left and Right (Infinity Ergodox, 2015-08-07) DPH (Model F capsense controller using teensy2++)

WhiteFox, from the project README
From the project README

Main components on the WhiteFox

MK20DX256VLH7MK20DX256VMC7RIS31FL3731C-SALS2

WhiteFox bill of materials (BOM)

296 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MK20DX256VLH7
NXP / Freescale
U1
1
MK20DX256VMC7R
NXP / Freescale
U2
1
IS31FL3731C-SALS2
IS31FL3731C
ISSI
U3
1
TC1264-3.3VDB
TC1264
Microchip
Q1
1
NX3225SA-16.000M-STD-CSR-1
CRYSTAL
NDK
X1
1
E8124-010-01
USBC
Pulse Electronics
J1
1
FLASH_HDR
P1
1
CONN_11
P2
3
>VALUE
FID1, FID2, FID3
1
1PIN
H1
71
SW
S1, S2, S3, S4, S5, S6, S7, S8 +63
1
SKQGAKE010
TAC_SWITCH
ALPS
S72
15
SW
S115, S145, S147, S159, S162, S163, S164, S165 +7
15
STAB
STAB1, STAB2, STAB3, STAB4, STAB5, STAB6, STAB7, STAB8 +7
71
LED
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +63
1
LED
Osram Opto Semiconductor
LED72
15
LED
LED115, LED145, LED147, LED159, LED162, LED163, LED164, LED165 +7
71
1N4148W-TP
DIODE
Micro Commercial Components
D1, D2, D3, D4, D5, D6, D7, D8 +63
2
LXES15AAA1-133
ESD_BIDIR_1CH
Murata
D72, D73
3
JMK105C6105KV-F
1uF
Taiyo Yuden
C1, C2, C6
Show 9 more
QtyPartRefs
6
EMK105B7104KV-F
0.1uF
Taiyo Yuden
C3, C4, C5, C7, C9, C10
1
JMK105B7224KV-F
0.22uF
Taiyo Yuden
C8
2
RK73B1ETTP330J
33
KOA Speer
R1, R2
2
RK73B1ETTP101J
100
KOA Speer
R3, R4
3
RK73B1ETTP472J
4.7k
KOA Speer
R5, R6, R7
1
RK73B1ETTP102J
1k
KOA Speer
R8
1
RK73B1ETTP104J
100k
KOA Speer
R9
1
RK73B1ETTP203J
20k
KOA Speer
R10
2
RK73B1ETTP512J
5.1k
KOA Speer
R11, R12

WhiteFox design files

The KiCad project lives in the kiibohd/pcb repository on GitHub; these links point at the commit this page was built from.

WhiteFox: common questions

What microcontroller does the WhiteFox use?

The WhiteFox is built around the MK20DX256VLH7, from the NXP family.

How big is the WhiteFox PCB?

The WhiteFox measures 304.8 × 101.1 mm and is 1.6002 mm thick.

How many components are on the WhiteFox?

296 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the WhiteFox design files?

From the kiibohd/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the WhiteFox design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which kiibohd chose for the repository.

Can I test firmware for the WhiteFox without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in pcb

Similar boards