K-Type
kiibohd·pcb·K-Type/K-Type.kicad_pcb
About the K-Type PCB
K-Type is an open source NXP PCB design by kiibohd, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 357.5 × 131.8 mm, with 361 components from 27 distinct parts.
Its main chip is the MK20DX256VLH7, from the NXP family. Other key parts include the TS3DS10224RUKR, TS3USB30EDGSR and IS31FL3733. By type, the board carries 120 LEDs, 88 switches, 87 diodes, 23 capacitors, 17 resistors and 5 ICs.
It belongs with the keyboards designs in this gallery.
From the project
PCB and PCB related bits
PCB and PCB Related Bits ========================
In general kicad is used for projects. A project will be explicit if another program is required to view.
Kira, 2019-01-17 K-Type, 2017-11-02 WhiteFox, 2016-06-11 IC60 (Infinity 60% Keyboard, 2016-20-07) ICED Left and Right (Infinity Ergodox, 2015-08-07) DPH (Model F capsense controller using teensy2++)

Main components on the K-Type
K-Type bill of materials (BOM)
361 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MK20DX256VLH7 | LQFP64 | U1 |
| 1 | TS3DS10224RUKR TS3DS10224 | QFN_20_0.4 | U2 |
| 1 | TS3USB30EDGSR TS3USB30E | VSSOP-10 | U3 |
| 2 | IS31FL3733 | QFN-48-6mm-vias | U4, U5 |
| 1 | NX3225SA-16.000M-STD-CSR-1 CRYSTAL | NX3225SA | X1 |
| 2 | DX07B024XJ1R1300 USBC | USB_C_MIDMOUNT_TH_IMPCUT | J1, J2 |
| 1 | FLASH_HDR | JLINK_NEEDLE | P1 |
| 1 | CONN_16 | HEADER_1x16 | P2 |
| 6 | >VALUE | FID | FID1, FID2, FID3, FID4, FID5, FID6 |
| 8 | 1PIN | 1PAD | MH1, MH2, MH3, MH4, MH5, MH6, MH7, MH8 |
| 87 | SW | SW_SOCKET_COMBINED_T | S1, S2, S3, S4, S5, S6, S7, S8 +79 |
| 1 | SKQGAKE010 TAC_SWITCH | TACT_5.2x5.2 | S88 |
| 2 | 1PAD | 1PAD-NPTH-SMALL | TH1, TH2 |
| 87 | RGBLED | LED_RGB_3.2x2.8_REVMOUNT | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +79 |
| 32 | RGBLED | LED_RGB_3.2x2.8_REVMOUNT_BACKWARDS | LED88, LED89, LED90, LED91, LED92, LED93, LED94, LED95 +24 |
| 1 | LED | LED-0603 | LED120 |
| 87 | DIODE | SOD-523 | D1, D2, D3, D4, D5, D6, D7, D8 +79 |
| 8 | JMK105BJ474KV-F 0.47uF | SMD-0402 | C1, C3, C7, C10, C15, C17, C19, C22 |
| 12 | EMK105B7104KV-F 0.1uF | SMD-0402 | C2, C5, C6, C8, C9, C11, C12, C16 +4 |
| 1 | EEF-CX1D220R 22uF | SMD-7343-Pol | C4 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | JMK105C6225MV-F 2.2uF | SMD-0402 | C13, C14 |
| 2 | RK73B1ETTP330J 33 | SMD-0402 | R1, R2 |
| 5 | RK73B1ETTP102J 1k | SMD-0402 | R3, R4, R12, R13, R16 |
| 2 | RK73B1ETTP104J 100k | SMD-0402 | R5, R6 |
| 4 | RK73B1ETTP512J 5.1k | SMD-0402 | R7, R8, R10, R11 |
| 2 | RK73B1ETTP133J 13k | SMD-0402 | R9, R17 |
| 2 | RK73B1ETTP101J 100 | SMD-0402 | R14, R15 |
K-Type design files
The KiCad project lives in the kiibohd/pcb repository on GitHub; these links point at the commit this page was built from.
K-Type: common questions
What microcontroller does the K-Type use?
The K-Type is built around the MK20DX256VLH7, from the NXP family.
How big is the K-Type PCB?
The K-Type measures 357.5 × 131.8 mm and is 1.6002 mm thick.
How many components are on the K-Type?
361 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the K-Type design files?
From the kiibohd/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the K-Type design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which kiibohd chose for the repository.
Can I test firmware for the K-Type without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in pcb
Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416NXP
WhiteFox
kiibohd
304.8 × 101.1 mm296 partsCERN-OHL-1.2416NXP
IC60
kiibohd
285 × 95 mm242 partsCERN-OHL-1.2416NXP
ICED-L
kiibohd
175.4 × 145 mm163 partsCERN-OHL-1.2416NXP
ICED-R
kiibohd
175.4 × 145 mm163 partsCERN-OHL-1.2416NXP
Testcontroller
kiibohd
145.8 × 42.9 mm45 parts2LCERN-OHL-1.2416
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532