BMS-monitor hw
KimBP·BMS-monitor-hw
About the BMS-monitor hw PCB
BMS-monitor hw is an open source ESP32 PCB design by KimBP, published on GitHub. It is a 2-layer board measuring 98 × 56.3 mm, with 14 components from 9 distinct parts.
Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. Other key parts include the 2365-DC-DC module, TJA1050 Module and LCD_3.5_TFT_SPI_480x320. By type, the board carries 6 resistors, 4 ICs and 4 connectors.
It belongs with the power & battery and displays & leds designs in this gallery.
From the project
Hardware for BMS-monitor
This repository contains a Kicad project defining the HW for the bms-monitor project.
Version v2.0 is a prototype made for an esp32s3_devkitc with 9 or 10 modules between the two pin rows.
The display to use is a 3.5" TFT LCD shield based on a ILI9488 controller with SPI. Furthermore the display has an xpt2046 touch controller. Also SPI
- Diodes to make power possible both via NMEA connector and a separate power supply at the same time
Main components on the BMS-monitor hw
BMS-monitor hw bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2365-DC-DC module | DC-DC-2365-Module | U1 |
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKitC | U2 |
| 1 | TJA1050 Module | CAN_Transceiver_Module | U3 |
| 1 | LCD_3.5_TFT_SPI_480x320 | PinSocket_1x14_P2.54mm_Vertical | U5 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x22 | PinHeader_1x22_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | TerminalBlock_bornier-4_P5.08mm | J3 |
| 1 | MI5K101-400-A0-05 | MI5K101400A005 | J4 |
| 6 | 10K | R_Box_L8.4mm_W2.5mm_P5.08mm | R1, R2, R3, R4, R5, R6 |
BMS-monitor hw design files
The KiCad project lives in the KimBP/BMS-monitor-hw repository on GitHub; these links point at the commit this page was built from.
- LayoutBmsMonitor.kicad_pcb
- SchematicBmsMonitor.kicad_sch
BMS-monitor hw: common questions
What microcontroller does the BMS-monitor hw use?
The BMS-monitor hw is built around the ESP32-S3-DevKitC, from the ESP32 family.
How big is the BMS-monitor hw PCB?
The BMS-monitor hw measures 98 × 56.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BMS-monitor hw?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the BMS-monitor hw design files?
From the KimBP/BMS-monitor-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BMS-monitor hw design in my own project?
The repository has no license, so all rights stay with KimBP. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BMS-monitor hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k