HardLabs

Kiwikit rpi pico draft

kiwih·kiwikit-pico-baseboard·kiwikit-rpi-pico/kiwikit-rpi-pico-draft.kicad_pcb

Kiwikit rpi pico draft PCB layout, top view — open source board by kiwih
Simulate this board

About the Kiwikit rpi pico draft PCB

Kiwikit rpi pico draft is an open source PCB design by kiwih, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 59 mm, with 25 components from 14 distinct parts.

Other key parts include the W25Q32JVSS, OLED-I2C-Module-Aliexpress, MCP2551-I-P and AT24CS08-XHM. By type, the board carries 8 resistors, 5 capacitors, 4 ICs, 3 connectors, 2 switches and 2 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Open-source hardware breakout board for a basic RP2040 Raspberry Pi Pico module

This board provides an easy-to-solder all-throughole 10cm x 10cm 2-layer board which is used in conjunction with a Raspberry Pi Pico for basic, fun experimentation!

Features include: Three general purpose buttons and a reset button, Two general purpose LEDs and a power LED, An I2C SSD1306 Screen, An I2C AT24 EEPROM An LDR for Analog experimentation, And a bunch more expansion ports, two of which are arranged to work with cheap SD card and accelerometer modules!

Kiwikit rpi pico draft, from the project README
From the project README

Main components on the Kiwikit rpi pico draft

W25Q32JVSSOLED-I2C-Module-AliexpressMCP2551-I-PAT24CS08-XHM

Kiwikit rpi pico draft bill of materials (BOM)

25 components, 14 distinct parts.

QtyPartRefs
1
W25Q32JVSS
U1
1
OLED-I2C-Module-Aliexpress
U2
1
MCP2551-I-P
U3
1
AT24CS08-XHM
U4
2
Conn_02x19_Odd_Even
CN7, CN10
1
Conn_02x04_Odd_Even
J1
1
Jumper
JP1
2
SW_Push
SW1, SW2
2
LED
D1, D2
5
100nF
C1, C2, C3, C4, C5
4
47K
R1, R2, R3, R4
1
0
R5
1
120
R6
2
470
R7, R8

Kiwikit rpi pico draft design files

The KiCad project lives in the kiwih/kiwikit-pico-baseboard repository on GitHub; these links point at the commit this page was built from.

Kiwikit rpi pico draft: common questions

How big is the Kiwikit rpi pico draft PCB?

The Kiwikit rpi pico draft measures 70 × 59 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kiwikit rpi pico draft?

25 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kiwikit rpi pico draft design files?

From the kiwih/kiwikit-pico-baseboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Kiwikit rpi pico draft design in my own project?

Yes, under the terms of its MIT license, which kiwih chose for the repository.

More boards in kiwikit-pico-baseboard

Similar boards