Messenger

kiwo17·messenger·schematic/schematic/schematic.kicad_pcb

Messenger PCB layout, top view — open source RP2040/RP2350 board by kiwo17

About the Messenger PCB

Messenger is an open source RP2040/RP2350 PCB design by kiwo17, published on GitHub. It is a 2-layer board measuring 45 × 53 mm, with 5 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the 74AHCT125. By type, the board carries 2 capacitors, 1 IC, 1 module and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

buildung matrices LED that display daily messenges and quotes.

It works by using LED matrices, which allows to use tons of LED while using less pins.

The messenger is going to be a multitasker!

I want it display daily encouraging motivating quotes or phrases to inspire in the morning. During the day It the messenger is going to be displayed. It will have different states based on the weather.

In the beginning I had A LOT of troubleshooting. I was very overwhelmed because I didn't quite understand the guide I was using.

Messenger, from the project README
From the project README

Main components on the Messenger

Messenger bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
74AHCT125
U1
1
RaspberryPi_Pico
A1
1
Conn_01x05
J1
1
uF10
C1
1
nF100
C2

Messenger design files

The KiCad project lives in the kiwo17/messenger repository on GitHub; these links point at the commit this page was built from.

Messenger: common questions

What microcontroller does the Messenger use?

The Messenger is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Messenger PCB?

The Messenger measures 45 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Messenger?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Messenger design files?

From the kiwo17/messenger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Messenger design in my own project?

The repository has no license, so all rights stay with kiwo17. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Messenger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards