ChainlinkDriver
kiwonbyun·split-flap-test·electronics/chainlinkDriver/chainlinkDriver.kicad_pcb
About the ChainlinkDriver PCB
ChainlinkDriver is an open source PCB design by kiwonbyun, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 198.1 × 30.5 mm, with 58 components from 14 distinct parts.
Other key parts include the 74HC595, TPL7407L, 74HC125 and 74HC165. By type, the board carries 17 connectors, 13 resistors, 12 capacitors, 10 ICs and 6 diodes.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
This is a DIY ESP32-based split-flap display, optimized for easy assembly at home in small quantities but able to be scaled up to large affordable displays.
This is a DIY ESP32-based split-flap display, optimized for easy assembly at home in small quantities but able to be scaled up to large affordable displays.
The splitflap community Discord server is the best place to keep up with the latest changes or ask questions about the project!
Want to help support development or just say "thanks"? Consider a one-time or monthly sponsorship:

Main components on the ChainlinkDriver
ChainlinkDriver bill of materials (BOM)
58 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm_silk | U1, U5, U7, U9 |
| 4 | TPL7407L | SOIC-16_3.9x9.9mm_P1.27mm_silk | U2, U6, U8, U10 |
| 1 | 74HC125 | SOIC-14_3.9x8.7mm_P1.27mm_silk | U3 |
| 1 | 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm_silk | U4 |
| 6 | Motor | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3, J5, J6, J7, J12, J13 |
| 6 | Sensor | PinHeader_1x03_P2.54mm_Vertical | J8, J9, J10, J11, J14, J15 |
| 3 | Power | Generic-5.08-2P | J16, J17, J18 |
| 2 | IDC | IDC-Header_2x04_P2.54mm_Vertical | J19, J20 |
| 6 | LED | LED_0603_1608Metric_Silkscreen | D1, D2, D3, D4, D5, D6 |
| 10 | 0.1uF | C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C9, C10 +2 |
| 1 | 100uF | CP_Elec_8x10 | C3 |
| 1 | 10uF | CP_Elec_4x5.3 | C8 |
| 6 | 220R | R_0603_1608Metric | R1, R2, R3, R4, R5, R10 |
| 7 | 47k | R_0603_1608Metric | R6, R7, R8, R9, R11, R12, R14 |
ChainlinkDriver design files
The KiCad project lives in the kiwonbyun/split-flap-test repository on GitHub; these links point at the commit this page was built from.
ChainlinkDriver: common questions
How big is the ChainlinkDriver PCB?
The ChainlinkDriver measures 198.1 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ChainlinkDriver?
58 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ChainlinkDriver design files?
From the kiwonbyun/split-flap-test repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ChainlinkDriver design in my own project?
Yes, under the terms of its Apache-2.0 license, which kiwonbyun chose for the repository.
More boards in split-flap-test
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k