11 open source boards using the TPL7407L

Real designs built with the TPL7407L, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TPL7407L

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPL7407L connects to, and the resistors, capacitors and other passives placed on it.

  • The COM pin is tied to 5V on 6 of 6 designs.
GNDpin 8Connected to: GND 100%
COMpin 9Connected to: 5V 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkBase by scottbez1, Open secure esc 6s 10a brushed can485 iso by Stab-Rabbit-coding, ChainlinkBase by kiwonbyun and ChainlinkBase by nintando64.

The TPL7407L in open source designs

The gallery holds 11 open source boards using the TPL7407L from 6 GitHub repositories; a typical one measures about 98.4 × 42 mm and carries around 82 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is ChainlinkBase by scottbez1.

What boards using the TPL7407L are built for

TPL7407L: common questions

Where can I find a TPL7407L reference design?

Each of the 11 boards on this page is a real design using the TPL7407L. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPL7407L COM pin connected?

The COM pin is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPL7407L.

What parts are used alongside the TPL7407L?

The 74HC125, 74HC165, 74HC595, AP7361C-33E and Buck appear in the most repositories here.

How big is a typical board using the TPL7407L?

The median is 98.4 × 42 mm, and 100% are two-layer designs.

What is the most popular open source board using the TPL7407L?

By GitHub stars, ChainlinkBase by scottbez1, with 4,156 stars.

Can I simulate one of these boards using the TPL7407L before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part