Dogrudan sdr C
kocer·direct-sampling-sdr·hardware/kicad/C_rf/dogrudan_sdr_C.kicad_pcb
About the Dogrudan sdr C PCB
Dogrudan sdr C is an open source PCB design by kocer, published on GitHub. It is a 2-layer board measuring 350 × 235 mm, with 392 components from 103 distinct parts.
Other key parts include the PE4312C-Z, 74HC595D, DRV8833PWPR and TPS62130. By type, the board carries 140 capacitors, 80 resistors, 73 inductors, 28 ICs, 28 relays and 16 diodes.
It belongs with the rf & radio and audio designs in this gallery.
From the project
Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.
KiCad standart kütüphanesinden ayrıca: W25Q128JVS, TPS62130, TPS7A20.
gensymbols.py kutu geometrisini pin sayısı ve isim uzunluklarından** hesaplıyor. Elle kutu yazma; iki kere denedim, ikisinde de pin gövdesi kutunun içinde kaldı ve o pine tel bağlanamadı.
ABLNO ayak izi bu depoda çizildi: lib/dogrudan-sdr.pretty/ OscillatorAbraconABLNO4pad14.3x8.7mm.kicadmod` Gövde 14.30 × 8.70 mm, 4 ped 2.5 × 1.5 mm, aralık 5.08 × 5.80 mm.
Main components on the Dogrudan sdr C
Dogrudan sdr C bill of materials (BOM)
392 components, 103 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PE4312C-Z | TQFN-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm | U40, U41, U42, U43 |
| 7 | 74HC595D | SOIC-16_3.9x9.9mm_P1.27mm | U60, U61, U62, U63, U64, U65, U66 |
| 16 | DRV8833PWPR | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U70, U71, U72, U73, U74, U75, U76, U77 +8 |
| 1 | TPS62130 | VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U90 |
| 1 | C496550 SMA anten 1 | SMA_Amphenol_132289_EdgeMount | J1 |
| 1 | C496550 SMA anten 2 | SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | C496550 SMA anten 3 | SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | C496550 SMA anten 4 | SMA_Amphenol_132289_EdgeMount | J4 |
| 1 | EL A kartina | PinHeader_2x10_P2.54mm_Vertical | J80 |
| 1 | EL A kartina #2 | PinHeader_1x06_P2.54mm_Vertical | J81 |
| 1 | C496550 RX1 -> A | SMA_Amphenol_132289_EdgeMount | J82 |
| 1 | C496550 RX2 -> A | SMA_Amphenol_132289_EdgeMount | J83 |
| 1 | C496550 RX3 -> A | SMA_Amphenol_132289_EdgeMount | J84 |
| 1 | C496550 RX4 -> A | SMA_Amphenol_132289_EdgeMount | J85 |
| 1 | C496550 TX1 <- A | SMA_Amphenol_132289_EdgeMount | J86 |
| 1 | C496550 TX2 <- A | SMA_Amphenol_132289_EdgeMount | J87 |
| 1 | C496550 TX3 <- A | SMA_Amphenol_132289_EdgeMount | J88 |
| 1 | C496550 TX4 <- A | SMA_Amphenol_132289_EdgeMount | J89 |
| 1 | EL D kartina | PinHeader_1x06_P2.54mm_Vertical | J90 |
| 4 | C2909520 GDT 90V | GDT_Disc_D12mm_W3.9mm_P7.5mm | E100, E109, E118, E127 |
Show 83 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 28 | G6KU-2F-Y | Relay_DPDT_Omron_G6K-2F-Y | K11, K12, K13, K14, K15, K16, K17, K21 +20 |
| 4 | G6K-2F-Y | Relay_DPDT_Omron_G6K-2F-Y | KT1, KT2, KT3, KT4 |
| 4 | 2N7002 | SOT-23 | QT1, QT2, QT3, QT4 |
| 4 | SMBJ20A | D_SMB | D101, D110, D119, D128 |
| 12 | 1N4148WS | D_SOD-323 | D102, D105, D106, D111, D114, D115, D120, D123 +4 |
| 1 | 2.2UH 2.2uH | L_Taiyo-Yuden_NR-30xx | L80 |
| 6 | 1UH 1uH | L_1210_3225Metric | L1000, L1002, L1006, L1008, L1078, L1080 |
| 1 | 18UH 18uH | L_1210_3225Metric | L1004 |
| 1 | 3.3UH 3.3uH | L_1210_3225Metric | L1010 |
| 2 | 470NH 470nH | L_0805_2012Metric | L1012, L1014 |
| 1 | 2.2UH 2.2uH | L_1210_3225Metric | L1016 |
| 2 | 220NH 220nH | L_0603_1608Metric | L1018, L1020 |
| 1 | 1.5UH 1.5uH | L_1210_3225Metric | L1022 |
| 2 | 68NH 150nH | L_0603_1608Metric | L1024, L1026 |
| 1 | 390NH 680nH | L_1210_3225Metric | L1028 |
| 6 | 33nH | L_0603_1608Metric | L1030, L1032, L1066, L1068, L1138, L1140 |
| 2 | 33NH 820nH | L_1210_3225Metric | L1034, L1070 |
| 10 | 1uH | L_1210_3225Metric | L1036, L1038, L1042, L1044, L1072, L1074, L1108, L1110 +2 |
| 1 | 18uH | L_1210_3225Metric | L1040 |
| 2 | 3.3uH | L_1210_3225Metric | L1046, L1118 |
| 4 | 470nH | L_0805_2012Metric | L1048, L1050, L1120, L1122 |
| 2 | 2.2uH | L_1210_3225Metric | L1052, L1124 |
| 4 | 220nH | L_0603_1608Metric | L1054, L1056, L1126, L1128 |
| 2 | 1.5uH | L_1210_3225Metric | L1058, L1130 |
| 4 | 150nH | L_0603_1608Metric | L1060, L1062, L1132, L1134 |
| 2 | 680nH | L_1210_3225Metric | L1064, L1136 |
| 1 | 820NH 18uH | L_1210_3225Metric | L1076 |
| 1 | 18UH 3.3uH | L_1210_3225Metric | L1082 |
| 2 | 1UH 470nH | L_0805_2012Metric | L1084, L1086 |
| 1 | 3.3UH 2.2uH | L_1210_3225Metric | L1088 |
| 2 | 470NH 220nH | L_0603_1608Metric | L1090, L1092 |
| 1 | 2.2UH 1.5uH | L_1210_3225Metric | L1094 |
| 2 | 220NH 150nH | L_0603_1608Metric | L1096, L1098 |
| 1 | 1.5UH 680nH | L_1210_3225Metric | L1100 |
| 2 | 68NH 33nH | L_0603_1608Metric | L1102, L1104 |
| 1 | 390NH 820nH | L_1210_3225Metric | L1106 |
| 1 | 33NH 18uH | L_1210_3225Metric | L1112 |
| 1 | 820nH | L_1210_3225Metric | L1142 |
| 2 | 22UF 22uF | C_0603_1608Metric | C80, C81 |
| 25 | 100NF 100nF | C_0603_1608Metric | C82, C84, C600, C601, C602, C603, C604, C605 +17 |
| 1 | 10UF 10uF | C_1206_3216Metric | C83 |
| 8 | 100NF 100nF | C_0402_1005Metric | C407, C408, C416, C417, C425, C426, C434, C435 |
| 16 | 10NF 10nF | C_0603_1608Metric | C609, C614, C619, C624, C629, C634, C639, C644 +8 |
| 16 | 2.2UF 2.2uF | C_0603_1608Metric | C610, C615, C620, C625, C630, C635, C640, C645 +8 |
| 2 | 6800PF 6800pF | C_0603_1608Metric | C1001, C1003 |
| 3 | 390PF 390pF | C_0603_1608Metric | C1005, C1011, C1083 |
| 2 | 1200PF 1200pF | C_0603_1608Metric | C1007, C1009 |
| 2 | 680PF 680pF | C_0603_1608Metric | C1013, C1015 |
| 1 | 180PF 180pF | C_0603_1608Metric | C1017 |
| 2 | 470PF 470pF | C_0603_1608Metric | C1019, C1021 |
| 1 | 68PF 68pF | C_0603_1608Metric | C1023 |
| 4 | 560PF 270pF | C_0603_1608Metric | C1025, C1027, C1103, C1105 |
| 1 | 82PF 56pF | C_0603_1608Metric | C1029 |
| 8 | 270pF | C_0603_1608Metric | C1031, C1061, C1063, C1067, C1133, C1135, C1139, C1141 |
| 1 | 390PF 270pF | C_0603_1608Metric | C1033 |
| 2 | 1200PF 12pF | C_0603_1608Metric | C1035, C1071 |
| 4 | 6800pF | C_0603_1608Metric | C1037, C1039, C1073, C1109 |
| 3 | 390pF | C_0603_1608Metric | C1041, C1047, C1119 |
| 4 | 1200pF | C_0603_1608Metric | C1043, C1045, C1115, C1117 |
| 4 | 680pF | C_0603_1608Metric | C1049, C1051, C1121, C1123 |
| 2 | 180pF | C_0603_1608Metric | C1053, C1125 |
| 4 | 470pF | C_0603_1608Metric | C1055, C1057, C1127, C1129 |
| 2 | 68pF | C_0603_1608Metric | C1059, C1131 |
| 2 | 56pF | C_0603_1608Metric | C1065, C1137 |
| 1 | 22PF 270pF | C_0603_1608Metric | C1069 |
| 2 | 390PF 6800pF | C_0603_1608Metric | C1075, C1111 |
| 1 | 12PF 390pF | C_0603_1608Metric | C1077 |
| 2 | 6800PF 1200pF | C_0603_1608Metric | C1079, C1081 |
| 2 | 1200PF 680pF | C_0603_1608Metric | C1085, C1087 |
| 1 | 390PF 180pF | C_0603_1608Metric | C1089 |
| 2 | 680PF 470pF | C_0603_1608Metric | C1091, C1093 |
| 1 | 180PF 68pF | C_0603_1608Metric | C1095 |
| 2 | 470PF 270pF | C_0603_1608Metric | C1097, C1099 |
| 1 | 68PF 56pF | C_0603_1608Metric | C1101 |
| 1 | 82PF 12pF | C_0603_1608Metric | C1107 |
| 1 | 1200PF 390pF | C_0603_1608Metric | C1113 |
| 1 | 12pF | C_0603_1608Metric | C1143 |
| 1 | 105K 105k | R_0603_1608Metric | R80 |
| 1 | 20K 20k | R_0603_1608Metric | R81 |
| 41 | C21189 0R | R_0603_1608Metric | R90, R107, R108, R116, R117, R125, R126, R134 +33 |
| 4 | 1k | R_0603_1608Metric | R103, R112, R121, R130 |
| 4 | 100K 100k | R_0603_1608Metric | R104, R113, R122, R131 |
| 29 | 10K 10k | R_0603_1608Metric | R400, R401, R402, R403, R404, R405, R406, R409 +21 |
Dogrudan sdr C design files
The KiCad project lives in the kocer/direct-sampling-sdr repository on GitHub; these links point at the commit this page was built from.
Dogrudan sdr C: common questions
How big is the Dogrudan sdr C PCB?
The Dogrudan sdr C measures 350 × 235 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dogrudan sdr C?
392 components, from 103 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dogrudan sdr C design files?
From the kocer/direct-sampling-sdr repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dogrudan sdr C design in my own project?
The repository has no license, so all rights stay with kocer. Use it as a reference, and ask the author before reusing the design.
More boards in direct-sampling-sdr
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687