KnH0F

kodachi614·macropaw·Beatboxer/hardware/KnH0F.kicad_pcb

KnH0F PCB layout, top view — open source RP2040/RP2350 board by kodachi614

About the KnH0F PCB

KnH0F is an open source RP2040/RP2350 PCB design by kodachi614, published on GitHub. It is a 2-layer board measuring 160 × 120 mm, with 179 components from 19 distinct parts.

Its main chip is the C2040, from the RP2040/RP2350 family. Other key parts include the C151417, C6186 and C97521. By type, the board carries 67 switches, 64 diodes, 26 capacitors, 8 LEDs, 7 resistors and 4 ICs.

It belongs with the keyboards designs in this gallery.

From the project

MacroPaw PCB

The MacroPaw keypads are a line of small yet fully-customizable mechanical keyboards. (The name was originally from my son, years ago when he was young, and the "paw" motif has kinda stuck.) The core of the MacroPaws is a Raspberry Pi RP2040 with 16MiB of flash memory, a USB-C connector, and an attached key matrix and RGB LEDs (which may or may not be under the keys). Some MacroPaws have more capability than others; all are crazy customizable by writing Python code. (Yes. Python. On a keyboard. It's insane and wonderful to live in the future.)

KnH0F, from the project README
From the project README

Main components on the KnH0F

KnH0F bill of materials (BOM)

179 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C151417
74AHC1G125
U1
1
C6186
AMS1117-3.3
U2
1
C2040
RP2040
U3
1
C97521
W25Q128JVS
U4
1
C9002
12MHz
Y1
1
C165948
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x06_Pin
J2
64
C131337
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +56
3
C318884
SW_Push
SW65, SW66, SW67
8
C2761795
WS2812B
NP1, NP2, NP3, NP4, NP5, NP6, NP7, NP8
64
C2128
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +56
12
C15525
10uF
C1, C2, C3, C4, C5, C6, C7, C8 +4
10
C1525
100nF
C10, C11, C12, C13, C14, C15, C16, C17 +2
2
C52923
1uF
C20, C21
2
C1570
30pF
C25, C26
2
C25100
27
R1, R2
2
C25905
5.1k
R3, R4
2
C11702
1k
R5, R7
1
C11702
1k
R6

KnH0F design files

The KiCad project lives in the kodachi614/macropaw repository on GitHub; these links point at the commit this page was built from.

KnH0F: common questions

What microcontroller does the KnH0F use?

The KnH0F is built around the C2040, from the RP2040/RP2350 family.

How big is the KnH0F PCB?

The KnH0F measures 160 × 120 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KnH0F?

179 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KnH0F design files?

From the kodachi614/macropaw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KnH0F design in my own project?

The repository has no license, so all rights stay with kodachi614. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KnH0F without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in macropaw

Similar boards