Davinci-Keyboard
koki0517·Davinci-Keyboard·Davinci-Keyboard/Davinci-Keyboard.kicad_pcb
About the Davinci-Keyboard PCB
Davinci-Keyboard is an open source ESP32 PCB design by koki0517, published on GitHub. It is a 2-layer board measuring 380.2 × 121.1 mm, with 233 components from 21 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the CH340K, FDS4935A and AZ1117CH-3.3TRG1. By type, the board carries 89 switches, 89 diodes, 26 resistors, 14 capacitors, 6 transistors and 4 ICs.
It belongs with the keyboards designs in this gallery.
Main components on the Davinci-Keyboard
Davinci-Keyboard bill of materials (BOM)
233 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | FDS4935A | SO-8_ONS-L | U2 |
| 1 | AZ1117CH-3.3TRG1 | SOT-223_DIO-M | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 4 | MMBT3906 | SOT-23 | Q3, Q4, Q5, Q6 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 3 | RotaryEncoder_Switch | RotaryEncoder_EC11-Switch | EN1, EN2, EN3 |
| 1 | BOOT | SW_SKRPACE010 | S1 |
| 1 | RST | SW_SKRPACE010 | S2 |
| 87 | SW_PUSH | CherryMX_Hotswap_via_1U | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +79 |
| 2 | OSG50603C1E | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 87 | 1N4148W | D_SOD-123 | D3, D4, D5, D6, D7, D8, D9, D10 +79 |
| 5 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C6, C8 |
| 1 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 22UF 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7 |
| 6 | 0.01UF 0.01uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C11, C12, C13, C14 |
| 2 | 5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 5.1K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 22 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 +14 |
Davinci-Keyboard design files
The KiCad project lives in the koki0517/Davinci-Keyboard repository on GitHub; these links point at the commit this page was built from.
Davinci-Keyboard: common questions
What microcontroller does the Davinci-Keyboard use?
The Davinci-Keyboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Davinci-Keyboard PCB?
The Davinci-Keyboard measures 380.2 × 121.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Davinci-Keyboard?
233 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Davinci-Keyboard design files?
From the koki0517/Davinci-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Davinci-Keyboard design in my own project?
The repository has no license, so all rights stay with koki0517. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Davinci-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k