Expanded-Midi keypad
kommaghchio·Expanded-Midi-keypad
About the Expanded-Midi keypad PCB
Expanded-Midi keypad is an open source ESP32 PCB design by kommaghchio, published on GitHub. It is a 2-layer board measuring 69 × 69.5 mm, with 4 components from 4 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 2 connectors, 1 IC and 1 switch.
It belongs with the audio and displays & leds designs in this gallery.
From the project
The original Hack Club MIDI keypad, but with expanded features.
The original Hack Club MIDI keypad (https://github.com/KaiPereira/MIDI-Keypad/tree/master), but with some additional features.
Powered by a XIAO-ESP32-S3, this project creates a MIDI keypad that allows you to play individual notes on a variety of instruments, controlled by turning the rotary encoder. From there each of the 7 capacitive touch keys plays a different note. Finally, the OLED screen shows which instrument you have selected, along with a WinAMP style display.
Main components on the Expanded-Midi keypad
Expanded-Midi keypad bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Conn_01x07 | Capacitive Keys | J1 |
| 1 | Conn_01x04 | Display_128x64_096_I2C | J2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
Expanded-Midi keypad design files
The KiCad project lives in the kommaghchio/Expanded-Midi-keypad repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi_keypad.kicad_pcb
- Schematicmidi_keypad.kicad_sch
- BOMBOM.csv
Expanded-Midi keypad: common questions
What microcontroller does the Expanded-Midi keypad use?
The Expanded-Midi keypad is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Expanded-Midi keypad PCB?
The Expanded-Midi keypad measures 69 × 69.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Expanded-Midi keypad?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Expanded-Midi keypad design files?
From the kommaghchio/Expanded-Midi-keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Expanded-Midi keypad design in my own project?
The repository has no license, so all rights stay with kommaghchio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Expanded-Midi keypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k