DeepLearningProject
KourFrost·DeepLearningProject·TinyFPGA-BX/board/TinyFPGA-BX.kicad_pcb
About the DeepLearningProject PCB
DeepLearningProject is an open source FPGA PCB design by KourFrost, published on GitHub. It is a 4-layer board measuring 17.8 × 35.6 mm, with 41 components from 22 distinct parts.
Its main chip is the iCE40-LP8K-CM81, from the FPGA family. Other key parts include the MIC5504-3.3YM5-TR, DSC6001CI2A-016.0000T, MIC5365-1.2YC5-TR and AT25SF081-SSHD-B. By type, the board carries 17 capacitors, 10 resistors, 5 ICs, 5 connectors, 2 diodes and 1 switch.
From the project
For full details on the ICE40 series of FPGAs you can read the ICE40 Family Handbook.
Main components on the DeepLearningProject
DeepLearningProject bill of materials (BOM)
41 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | iCE40-LP8K-CM81 | CM81 | U1 |
| 1 | MIC5504-3.3YM5-TR | SC-70-C5 | U2 |
| 1 | DSC6001CI2A-016.0000T | CDFN3225-4LD-PL-1 | U3 |
| 1 | MIC5365-1.2YC5-TR | SC-70-C5 | U4 |
| 1 | AT25SF081-SSHD-B | SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 2 | CONN_01X14 | Pin_Header_Straight_1x14_Pitch2.54mm | J1, J2 |
| 1 | USB_OTG | USB_Micro-B_Molex_47346-0001 | J3 |
| 1 | Conn_02x08_Odd_Even | Pin_Header_Straight_2x08_Pitch2.54mm_SMD | J4 |
| 1 | Conn_02x03_Odd_Even | Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J5 |
| 1 | SW_Push | PTS_810_SMT_Switch | SW1 |
| 2 | LED_Small | LED_0603 | D1, D2 |
| 1 | Bead | L_0603 | L1 |
| 4 | 1uF | C_0402_NoSilk | C1, C2, C3, C4 |
| 7 | 100nF | C_0402_NoSilk | C5, C7, C8, C9, C10, C11, C16 |
| 2 | 10uF | C_0603 | C6, C17 |
| 4 | 10nF | C_0402_NoSilk | C12, C13, C14, C15 |
| 1 | 1.5k | R_0402_NoSilk | R1 |
| 2 | 68 | R_0402_NoSilk | R2, R3 |
| 1 | 100 | R_0402_NoSilk | R4 |
| 3 | 10k | R_0402_NoSilk | R5, R7, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R | R_0402 | R6 |
| 2 | 270 | R_0402_NoSilk | R8, R9 |
DeepLearningProject design files
The KiCad project lives in the KourFrost/DeepLearningProject repository on GitHub; these links point at the commit this page was built from.
DeepLearningProject: common questions
What microcontroller does the DeepLearningProject use?
The DeepLearningProject is built around the iCE40-LP8K-CM81, from the FPGA family.
How big is the DeepLearningProject PCB?
The DeepLearningProject measures 17.8 × 35.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DeepLearningProject?
41 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the DeepLearningProject design files?
From the KourFrost/DeepLearningProject repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DeepLearningProject design in my own project?
The repository has no license, so all rights stay with KourFrost. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DeepLearningProject without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765