7 open source boards using the iCE40-LP8K-CM81
Real designs built with the iCE40-LP8K-CM81, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
TinyFPGA-BX
tinyfpga
17.8 × 35.6 mm41 parts4LCERN-OHL-1.2302FPGA
Output.panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4FPGA
Board
Roboy
71 × 40 mm78 parts2LBSD-3-Clause0FPGA
DeepLearningProject
KourFrost
17.8 × 35.6 mm41 parts4LNo license0FPGA
Panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4FPGA
TinyFPGA-BX
hbrc-fpga-class
17.8 × 35.6 mm41 parts4LNo license3FPGA
Board
Roboy
65 × 39 mm128 parts4LBSD-3-Clause4
How designs wire the iCE40-LP8K-CM81
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the iCE40-LP8K-CM81 connects to, and the resistors, capacitors and other passives placed on it.
- Pin A3 has a series resistor on 5 of 5 designs, most often 1.5 kΩ.
- Pin A4 has a series resistor on 5 of 5 designs, most often 68 Ω.
- Pin B4 has a series resistor on 5 of 5 designs, most often 68 Ω.
- Pin B5 has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin A3 | Connected to: A connector 60% |
|
| Pin A4 | Connected to: A connector 60% |
|
| Pin A5 | Connected to: 3.3V 80% · not connected 20% |
|
| Pin B4 | Connected to: A connector 60% |
|
| Pin B5 | Connected to: 3.3V 100% |
|
| Pin B9 | Connected to: 3.3V 80% · not connected 20% |
|
| Pin C3 | Connected to: Not connected 100% | — |
| Pin C4 | Connected to: Not connected 100% | — |
| Pin C5 | Connected to: Not connected 100% | — |
| Pin C6 | Connected to: 3.3V 80% · not connected 20% |
|
| Pin C7 | Connected to: Not connected 100% | — |
| Pin C8 | Connected to: 3.3V 100% |
|
| Pin D3 | Connected to: Not connected 100% | — |
| Pin D4 | Connected to: 1.2V 80% · not connected 20% |
|
| Pin D5 | Connected to: Not connected 100% | — |
| Pin D6 | Connected to: Not connected 100% | — |
| Pin D7 | Connected to: Not connected 100% | — |
| Pin E3 | Connected to: 1.2V 100% |
|
| Pin E4 | Connected to: GND 100% | — |
| Pin E5 | Connected to: GND 100% | — |
| Pin E6 | Connected to: Not connected 100% | — |
| Pin E7 | Connected to: Not connected 100% | — |
| Pin E9 | Connected to: 1.2V 80% · not connected 20% |
|
| Pin F1 | Connected to: 1.2V 100% |
|
| Pin F2 | Connected to: 1.2V 80% · not connected 20% |
|
| Pin F3 | Connected to: Not connected 100% | — |
| Pin F4 | Connected to: GND 100% | — |
| Pin F5 | Connected to: GND 100% | — |
| Pin F6 | Connected to: GND 100% | — |
| Pin F7 | Connected to: AT25SF081-SSHD-B 80%, a connector 80% |
|
| Pin F8 | Connected to: AT25SF081-SSHD-B 80%, a connector 80% · not connected 20% |
|
| Pin F9 | Connected to: GND 100% | — |
| Pin G3 | Connected to: Not connected 100% | — |
| Pin G4 | Connected to: Not connected 100% | — |
| Pin G5 | Connected to: Not connected 100% | — |
| Pin H3 | Connected to: 3.3V 80% · not connected 20% |
|
| Pin H4 | Connected to: AT25SF081-SSHD-B 80%, a connector 60% |
|
| Pin H6 | Connected to: Signal 100% |
|
| Pin H8 | Connected to: 3.3V 100% |
|
| Pin J5 | Connected to: 3.3V 80% · not connected 20% |
|
41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TinyFPGA-BX by tinyfpga, Board by Roboy, TinyFPGA-BX by hbrc-fpga-class and DeepLearningProject by KourFrost.
The iCE40-LP8K-CM81 in open source designs
The gallery holds 7 open source boards using the iCE40-LP8K-CM81 from 5 GitHub repositories; a typical one measures about 65 × 39 mm and carries around 78 components.
86% use four copper layers or more, and 71% carry an open source license.
The most starred is TinyFPGA-BX by tinyfpga.
Parts used alongside the iCE40-LP8K-CM81
Microcontrollers on boards using the iCE40-LP8K-CM81
What boards using the iCE40-LP8K-CM81 are built for
iCE40-LP8K-CM81: common questions
Where can I find a iCE40-LP8K-CM81 reference design?
Each of the 7 boards on this page is a real design using the iCE40-LP8K-CM81. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the iCE40-LP8K-CM81 pin A3?
Pin A3 has a series resistor on 5 of 5 designs, most often 1.5 kΩ. Counted from the KiCad layouts of 5 open source designs using the iCE40-LP8K-CM81.
What resistor goes on the iCE40-LP8K-CM81 pin A4?
Pin A4 has a series resistor on 5 of 5 designs, most often 68 Ω. Counted from the KiCad layouts of 5 open source designs using the iCE40-LP8K-CM81.
What resistor goes on the iCE40-LP8K-CM81 pin B4?
Pin B4 has a series resistor on 5 of 5 designs, most often 68 Ω. Counted from the KiCad layouts of 5 open source designs using the iCE40-LP8K-CM81.
What parts are used alongside the iCE40-LP8K-CM81?
The DSC6001CI2A-016.0000T, MIC5365-1.2YC5-TR, AT25SF081-SSHD-B and MIC5504-3.3YM5-TR appear in the most repositories here.
Which microcontrollers do boards using the iCE40-LP8K-CM81 use?
Most are built on FPGA (7).
How big is a typical board using the iCE40-LP8K-CM81?
The median is 65 × 39 mm, and 14% are two-layer designs.
What is the most popular open source board using the iCE40-LP8K-CM81?
By GitHub stars, TinyFPGA-BX by tinyfpga, with 302 stars.
Can I simulate one of these boards using the iCE40-LP8K-CM81 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.