7 open source boards using the AT25SF081-SSHD-B
Real designs built with the AT25SF081-SSHD-B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
TinyFPGA-BX
tinyfpga
17.8 × 35.6 mm41 parts4LCERN-OHL-1.2302FPGA
TinyFPGA-UP
glanc1
17.8 × 35.6 mm55 parts4LCERN-OHL-1.28FPGA
Output.panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4FPGA
DeepLearningProject
KourFrost
17.8 × 35.6 mm41 parts4LNo license0FPGA
Panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4FPGA
TinyFPGA-BX
hbrc-fpga-class
17.8 × 35.6 mm41 parts4LNo license3FPGA
Board
Roboy
65 × 39 mm128 parts4LBSD-3-Clause4
How designs wire the AT25SF081-SSHD-B
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AT25SF081-SSHD-B connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- Pin 7 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- Pin 4 is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 100%, the microcontroller 100% |
|
| Pin 3 | Connected to: A connector 80%, the microcontroller 80% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 7 | Connected to: A connector 80%, the microcontroller 80% |
|
| Pin 8 | Connected to: 3.3V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TinyFPGA-BX by tinyfpga, TinyFPGA-UP by glanc1, Board by Roboy and TinyFPGA-BX by hbrc-fpga-class.
The AT25SF081-SSHD-B in open source designs
The gallery holds 7 open source boards using the AT25SF081-SSHD-B from 5 GitHub repositories; a typical one measures about 17.8 × 35.6 mm and carries around 55 components.
100% use four copper layers or more, and 71% carry an open source license.
The most starred is TinyFPGA-BX by tinyfpga.
Parts used alongside the AT25SF081-SSHD-B
Microcontrollers on boards using the AT25SF081-SSHD-B
AT25SF081-SSHD-B: common questions
Where can I find a AT25SF081-SSHD-B reference design?
Each of the 7 boards on this page is a real design using the AT25SF081-SSHD-B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the AT25SF081-SSHD-B pin 1?
Pin 1 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the AT25SF081-SSHD-B.
What pull-up resistor is used on the AT25SF081-SSHD-B pin 3?
Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the AT25SF081-SSHD-B.
What pull-up resistor is used on the AT25SF081-SSHD-B pin 7?
Pin 7 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the AT25SF081-SSHD-B.
What parts are used alongside the AT25SF081-SSHD-B?
The DSC6001CI2A-016.0000T, iCE40-LP8K-CM81, MIC5365-1.2YC5-TR and MIC5504-3.3YM5-TR appear in the most repositories here.
Which microcontrollers do boards using the AT25SF081-SSHD-B use?
Most are built on FPGA (7).
How big is a typical board using the AT25SF081-SSHD-B?
The median is 17.8 × 35.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the AT25SF081-SSHD-B?
By GitHub stars, TinyFPGA-BX by tinyfpga, with 302 stars.
Can I simulate one of these boards using the AT25SF081-SSHD-B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.