Projekt SOC
KrivkaJ·Projekt_SOC_KiCad·Univerzalni_testovaci_platforma_nejen_pro_IoT_v1/Univerzalni_testovaci_platforma_nejen_pro_IoT_v1.kicad_pcb
About the Projekt SOC PCB
Projekt SOC is an open source ESP32 PCB design by KrivkaJ, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 119 components from 24 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the STM32F103ZETX, AMS1117-3.3 and ESP32-S3. By type, the board carries 79 resistors, 19 capacitors, 13 connectors, 4 ICs, 2 diodes and 1 crystal.
It belongs with the iot & wireless designs in this gallery.
Main components on the Projekt SOC
Projekt SOC bill of materials (BOM)
119 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103ZETX STM32F103ZETx | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | TO-252-2 | U2 |
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U3 |
| 1 | ESP32-S3 | ESP32-devkit_v1 | U4 |
| 1 | 12MHZ 12Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 11 | Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J1, J2, J3, J4, J7, J8, J9, J10 +3 |
| 1 | CONN_02X03_COUNTER_CLOCKWISE Conn_02x03_Counter_Clockwise | PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | C165948 USB_C_Receptacle | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J6 |
| 1 | SW_MEC_5E SW_Push_Dual | SW_SPST_TL3342 | SW1 |
| 2 | C2286 RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 4 | 10NF 10nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
| 4 | 10NF 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8 |
| 4 | 10NF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C14 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C15 |
| 1 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 22UF 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | C2798049 22µF solid tantalum | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C18 |
| 2 | 18PF 18pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C20 |
| 2 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R39 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 69 | 220R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 +61 |
| 3 | 1K5 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R73, R74, R79 |
| 2 | 5K1 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R75, R76 |
| 2 | 20R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R77, R78 |
Projekt SOC design files
The KiCad project lives in the KrivkaJ/Projekt_SOC_KiCad repository on GitHub; these links point at the commit this page was built from.
Projekt SOC: common questions
What microcontroller does the Projekt SOC use?
The Projekt SOC is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Projekt SOC PCB?
The Projekt SOC measures 100 × 100 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Projekt SOC?
119 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Projekt SOC design files?
From the KrivkaJ/Projekt_SOC_KiCad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Projekt SOC design in my own project?
The repository has no license, so all rights stay with KrivkaJ. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Projekt SOC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k