Source rotary
About the Source rotary PCB
Source rotary is an open source PCB design by krzys9876, published on GitHub under the MIT license. It is a 2-layer board measuring 27.8 × 25.2 mm, with 16 components from 15 distinct parts.
Other key parts include the MCP23008-xSS. By type, the board carries 13 connectors, 2 capacitors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
HTPC, Volumio player, power amp, power supply etc.
This is a dump of various files related to the devices that I use in my home entertainment setup.
A miniITX PC enclosed in custom case (see: modushop.pl). The PC is fanless, so I had to choose a relative low power processor and a good radiator. However, since I have a overhead projector with a loud fan it doesn't matter at all.
A Raspberry Pi based Volumio player (see: volumio.com) enclosed in custom case. There are two Pis: one is a controller for two displays, the other is the actual player.
Main components on the Source rotary
Source rotary bill of materials (BOM)
16 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23008-xSS | SSOP-20_5.3x7.2mm_P0.65mm | U1 |
| 1 | ARD | PinHeader_2x02_P2.54mm_Vertical_SMD | J1 |
| 1 | SRC_1 | PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | SRC_2 | PinHeader_1x01_P1.00mm_Vertical | J3 |
| 1 | SRC_3 | PinHeader_1x01_P1.00mm_Vertical | J4 |
| 1 | SRC_4 | PinHeader_1x01_P1.00mm_Vertical | J5 |
| 1 | SRC_5 | PinHeader_1x01_P1.00mm_Vertical | J6 |
| 1 | AUX | PinHeader_2x02_P2.54mm_Vertical_SMD | J7 |
| 1 | SRC_6 | PinHeader_1x01_P1.00mm_Vertical | J8 |
| 1 | SRC_7 | PinHeader_1x01_P1.00mm_Vertical | J9 |
| 1 | SRC_8 | PinHeader_1x01_P1.00mm_Vertical | J10 |
| 1 | SRC_9 | PinHeader_1x01_P1.00mm_Vertical | J11 |
| 1 | SRC_10 | PinHeader_1x01_P1.00mm_Vertical | J12 |
| 1 | SRC_GND | PinHeader_1x01_P1.00mm_Vertical | J13 |
| 2 | C | C_1206_3216Metric | C1, C2 |
Source rotary design files
The KiCad project lives in the krzys9876/htpc_rig repository on GitHub; these links point at the commit this page was built from.
Source rotary: common questions
How big is the Source rotary PCB?
The Source rotary measures 27.8 × 25.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Source rotary?
16 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Source rotary design files?
From the krzys9876/htpc_rig repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Source rotary design in my own project?
Yes, under the terms of its MIT license, which krzys9876 chose for the repository.
More boards in htpc_rig
Pre relay
171.2 × 52.7 mm71 parts2LMIT0
Attenuator
150.4 × 53.5 mm66 parts2LMIT0
AVR/ArduinoControl
62.7 × 35.6 mm40 parts2LMIT0
Atten rotary v01
109.2 × 55.9 mm31 parts2LMIT0
Pre relay2
172.7 × 59.7 mm25 parts2LMIT0
Attenuator3c
76.2 × 41.9 mm14 parts2LMIT0
Pre power
71.8 × 22 mm10 parts2LMIT0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k