9 open source boards using the MCP23008-xSS
Real designs built with the MCP23008-xSS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Watch2 (copy)
atctwo
48.5 × 42.9 mm70 partsMIT2RP2040/RP2350
Solarpump
rivimey
100 × 160 mm424 parts4LNo license1Cinco cinco
mikeysklar
98.1 × 68.1 mm11 parts2LGPL-3.01MBFrontEnd
LadyRoninEngineer
55 × 45 mm51 parts2LUnlicense34ESP32
Watch2-board outline
atctwo
48.6 × 42.9 mm68 partsMIT2ESP32
Watch2
atctwo
48.6 × 35.6 mm66 partsMIT2ESP32
Watch2-without led tab
atctwo
48.6 × 35.6 mm66 partsMIT2I2c mosfet
matthieuvigne
40 × 40 mm36 parts2LGPL-3.05Source rotary
krzys9876
27.8 × 25.2 mm16 parts2LMIT0
How designs wire the MCP23008-xSS
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP23008-xSS connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 5 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 5 kΩ).
- The INT pin is left unconnected on 5 of 6 designs.
- The RESET pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: A connector 83%, the microcontroller 33% |
|
| SDApin 2 | Connected to: A connector 83%, the microcontroller 33% |
|
| A2pin 3 | Connected to: GND 67% · a signal 33% | — |
| RESETpin 6 | Connected to: Signal 67% · 3.3V 33% |
|
| NCpin 7, 10, 11 | Connected to: Not connected 100% | — |
| INTpin 8 | Connected to: Not connected 83% · a signal 17% | — |
| VSSpin 9 | Connected to: GND 100% | — |
| GP0pin 12 | Connected to: A connector 33% · not connected 17% |
|
| GP1pin 13 | Connected to: A connector 33% · not connected 17% |
|
| GP2pin 14 | Connected to: A connector 33% · not connected 17% |
|
| GP3pin 15 | Connected to: A connector 33% · not connected 17% |
|
| GP4pin 16 | Connected to: A connector 33% · not connected 17% |
|
| GP6pin 18 | Connected to: Not connected 67% · a signal 33% | — |
| VDDpin 20 | Connected to: 3.3V 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MBFrontEnd by LadyRoninEngineer, I2c mosfet by matthieuvigne, Watch2 by atctwo and Cinco cinco by mikeysklar.
The MCP23008-xSS in open source designs
The gallery holds 9 open source boards using the MCP23008-xSS from 6 GitHub repositories; a typical one measures about 48.6 × 42.9 mm and carries around 66 components.
80% are two-layer designs, the rest use four layers or more, and 89% carry an open source license.
The most starred is MBFrontEnd by LadyRoninEngineer.
Microcontrollers on boards using the MCP23008-xSS
What boards using the MCP23008-xSS are built for
MCP23008-xSS: common questions
Where can I find a MCP23008-xSS reference design?
Each of the 9 boards on this page is a real design using the MCP23008-xSS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MCP23008-xSS SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 5 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP23008-xSS.
What pull-up resistor is used on the MCP23008-xSS SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 5 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP23008-xSS.
How is the MCP23008-xSS INT pin connected?
The INT pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MCP23008-xSS.
Which microcontrollers do boards using the MCP23008-xSS use?
Most are built on ESP32 (4) and RP2040/RP2350 (1).
How big is a typical board using the MCP23008-xSS?
The median is 48.6 × 42.9 mm, and 80% are two-layer designs.
What is the most popular open source board using the MCP23008-xSS?
By GitHub stars, MBFrontEnd by LadyRoninEngineer, with 34 stars.
Can I simulate one of these boards using the MCP23008-xSS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.