PCB 1
About the PCB 1
PCB 1 is an open source PCB design by kubbd, published on GitHub. It is a 2-layer board measuring 59 × 59 mm, with 4 components from 4 distinct parts.
Other key parts include the ZED-X20P. By type, the board carries 2 capacitors, 1 IC and 1 connector.
It belongs with the rf & radio, sensors and usb & debug tools designs in this gallery.
From the project
A soda-can-sized satellite designed to achieve autonomous, guided descent using a parafoil and real-time GNSS-based navigation. It collects atmospheric and flight data during descent and transmits telemetry live to enable precise tracking and targeted landing.
- Predictive landing guidance (steers to make predicted landing converge to target) - GNSS (ZED-X20P) with RTK passthrough (Teensy forwards RTCM bytes to GNSS) - LoRa (SX1262) bidirectional: - receive TARGET once - receive RTK continuously - send telemetry @ 1 Hz - BMP280: pressure + temperature (and sink-rate estimate) - BNO085: accelerometer + rotation vector (drop detection + heading) - Dual-servo differential steering - No buzzer
Main components on the PCB 1
PCB 1 bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ZED-X20P | MODULE_AS-RTK2B-MICRO-F9P-L1L2UFLTH-00 | U1 |
| 1 | JST-PH 1x6 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 1 | 0.1uF | C_0805_2012Metric | C1 |
| 1 | 10uF | C_0805_2012Metric | C2 |
PCB 1 design files
The KiCad project lives in the kubbd/AeroTrackNow repository on GitHub; these links point at the commit this page was built from.
PCB 1: common questions
How big is the PCB 1?
The PCB 1 measures 59 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB 1?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB 1 design files?
From the kubbd/AeroTrackNow repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB 1 design in my own project?
The repository has no license, so all rights stay with kubbd. Use it as a reference, and ask the author before reusing the design.
More boards in AeroTrackNow
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956