PCB 4
About the PCB 4
PCB 4 is an open source PCB design by kubbd, published on GitHub. It is a 2-layer board measuring 59.6 × 59.6 mm, with 12 components from 9 distinct parts.
Other key parts include the D24V22F5 and D24V10F3. By type, the board carries 6 capacitors, 4 connectors and 2 ICs.
It belongs with the rf & radio, sensors and usb & debug tools designs in this gallery.
From the project
A soda-can-sized satellite designed to achieve autonomous, guided descent using a parafoil and real-time GNSS-based navigation. It collects atmospheric and flight data during descent and transmits telemetry live to enable precise tracking and targeted landing.
- Predictive landing guidance (steers to make predicted landing converge to target) - GNSS (ZED-X20P) with RTK passthrough (Teensy forwards RTCM bytes to GNSS) - LoRa (SX1262) bidirectional: - receive TARGET once - receive RTK continuously - send telemetry @ 1 Hz - BMP280: pressure + temperature (and sink-rate estimate) - BNO085: accelerometer + rotation vector (drop detection + heading) - Dual-servo differential steering - No buzzer
Main components on the PCB 4
PCB 4 bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D24V22F5 | D24V22F5 | U1 |
| 1 | D24V10F3 | Pololu D24V10F3 | U2 |
| 1 | JST-PH 1x2 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | JST-PH 1x4 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | Servo 1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Servo 2 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | 10uF | C_0805_2012Metric | C1, C3 |
| 3 | 0.1uF | C_0805_2012Metric | C2, C4, C6 |
| 1 | 47uF | CP_Elec_5x5.4 | C5 |
PCB 4 design files
The KiCad project lives in the kubbd/AeroTrackNow repository on GitHub; these links point at the commit this page was built from.
PCB 4: common questions
How big is the PCB 4?
The PCB 4 measures 59.6 × 59.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB 4?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB 4 design files?
From the kubbd/AeroTrackNow repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB 4 design in my own project?
The repository has no license, so all rights stay with kubbd. Use it as a reference, and ask the author before reusing the design.
More boards in AeroTrackNow
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956