VolvocineWithCurrentSensorV4
About the VolvocineWithCurrentSensorV4 PCB
VolvocineWithCurrentSensorV4 is an open source PIC PCB design by KuraLab, published on GitHub. It is a 2-layer board measuring 29 × 32.3 mm, with 29 components from 25 distinct parts.
Its main chip is the PIC10F322-IOT, from the PIC family. Other key parts include the PAM2401SCADJ and INA226. By type, the board carries 7 resistors, 5 connectors, 3 ICs, 2 diodes, 1 transistor and 1 inductor.
From the project
電流センサを搭載したボルボシンロボット用PCB
Main components on the VolvocineWithCurrentSensorV4
VolvocineWithCurrentSensorV4 bill of materials (BOM)
29 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM2401SCADJ | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | PIC10F322-IOT | SOT-23-6 | U2 |
| 1 | INA226 | VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Si2315 | SOT-23 | Q2 |
| 2 | Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J2, J6 |
| 1 | Sensors | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Switch | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | battery | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cin1 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | Cout1 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cout2 |
| 1 | 330k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFB1 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFB2 |
| 1 | 50m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rshunt1 |
| 2 | 47uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | filter1, filter3 |
| 1 | 1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | filter2 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | D_Schottky | D_SOD-128 | D2 |
| 1 | 2.2uH | L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R12 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 27k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 3.9k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 470k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
VolvocineWithCurrentSensorV4 design files
The KiCad project lives in the KuraLab/VolvocineWithCurrentSensorV4 repository on GitHub; these links point at the commit this page was built from.
VolvocineWithCurrentSensorV4: common questions
What microcontroller does the VolvocineWithCurrentSensorV4 use?
The VolvocineWithCurrentSensorV4 is built around the PIC10F322-IOT, from the PIC family.
How big is the VolvocineWithCurrentSensorV4 PCB?
The VolvocineWithCurrentSensorV4 measures 29 × 32.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VolvocineWithCurrentSensorV4?
29 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the VolvocineWithCurrentSensorV4 design files?
From the KuraLab/VolvocineWithCurrentSensorV4 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the VolvocineWithCurrentSensorV4 design in my own project?
The repository has no license, so all rights stay with KuraLab. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the VolvocineWithCurrentSensorV4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICLens
ervanalb
80 × 80 mm53 parts4LNo license515
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0379
PICGB-CART256K-A
51.4 × 61 mm17 parts2LCC-BY-4.0379