HardLabs

W6502ctrl mega routed

kuwatay·6502ctrl·hardware/rev1/w6502ctrl-mega/w6502ctrl-mega_routed.kicad_pcb

W6502ctrl mega routed PCB layout, top view — open source AVR/Arduino board by kuwatay

About the W6502ctrl mega routed PCB

W6502ctrl mega routed is an open source AVR/Arduino PCB design by kuwatay, published on GitHub. It is a 2-layer board measuring 101.6 × 53.3 mm, with 27 components from 18 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the W65C02, 628128, 74HC00 and MicroCardAdapter. By type, the board carries 12 connectors, 6 resistors, 4 ICs, 3 capacitors, 1 switch and 1 diode.

It belongs with the retro computing designs in this gallery.

From the project

AVR-based supervisor for a w65c02 microcomputer based on z80ctrl https://github.com/jblang/z80ctrl

6502ctrl has the following features: Support W65C02 and 64KB(128KB) ram Console and other I/O are handled by DMA (ultra fast WAI instruction) Monitor with file management, memory inspector, and built-in 6502 disassembler Single-step debugging, breakpoints, and watchpoints to trace 6502 bus activity in real-time Arduino Shield style hardware (6502ctrl-mega) Flexible MIT-licensed firmware inhelited from z80ctrl

W6502ctrl mega routed, from the project README
From the project README

Main components on the W6502ctrl mega routed

W65C0262812874HC00MicroCardAdapter

W6502ctrl mega routed bill of materials (BOM)

27 components, 18 distinct parts.

QtyPartRefs
1
W65C02
U1
1
628128
U2
1
74HC00
U3
1
MicroCardAdapter
U4
1
Conn_01x02_Female
J1
1
Digital
P1
1
Power
P2
2
Analog
P3, P4
1
PWM
P5
1
PWM
P6
1
Communication
P7
4
CONN_01X01
P8, P10, P11, P13
1
SW_MEC_5E
SW1
1
LED
D1
3
100nF
C1, C2, C3
4
3.3k
R1, R2, R3, R4
1
10k
R5
1
1k
R6

W6502ctrl mega routed design files

The KiCad project lives in the kuwatay/6502ctrl repository on GitHub; these links point at the commit this page was built from.

W6502ctrl mega routed: common questions

What microcontroller does the W6502ctrl mega routed use?

The W6502ctrl mega routed is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the W6502ctrl mega routed PCB?

The W6502ctrl mega routed measures 101.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the W6502ctrl mega routed?

27 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the W6502ctrl mega routed design files?

From the kuwatay/6502ctrl repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the W6502ctrl mega routed design in my own project?

The repository has no license, so all rights stay with kuwatay. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the W6502ctrl mega routed without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 6502ctrl

Similar boards