17 open source boards using the 628128
Real designs built with the 628128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zx2022
michalin
100 × 100 mm34 parts2LGPL-3.041Zx sizif-128
UzixLS
140 × 85 mm107 parts2LMIT32MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028ESP8266
Divtiesus maple
anarsoul
76.5 × 56.9 mm41 parts2LGPL-3.016Jupiter-II-Expansion
ricaflops
164.5 × 71.8 mm95 parts2LMIT15AVR/Arduino
Cat644
carangil
101.6 × 76.2 mm46 parts2LGPL-2.011Z80 Micro
AidanHockey5
85.1 × 111.8 mm34 parts2LNo license6ESP8266
Divtiesus acer
arleybls
76.6 × 57.4 mm40 parts2LNo license3JFF
herraa1
250 × 150 mm132 parts2LGPL-3.02OSM39
christophetoularastel-eng
388.1 × 200 mm186 parts2LGPL-3.01AVR/Arduino
Z80Card
galjonsfigur
85.6 × 54 mm77 parts2LGPL-3.01Hobgoblin
iley
150 × 110 mm52 parts2LNo license0AVR/Arduino
W6502ctrl mega routed
kuwatay
101.6 × 53.3 mm27 parts2LNo license2MEM
KALTCHUK
99.7 × 69.9 mm28 parts2LNo license94Interf u
circuitly
115.6 × 108.2 mm23 parts2LNo license0Interf u
claynicholson
115.6 × 108.2 mm23 parts2LMIT102Interf u
nickradfc
115.6 × 108.2 mm23 parts2LNo license0
How designs wire the 628128
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 628128 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 88% | — |
| GNDpin 16 | Connected to: GND 100% | — |
| VCCpin 32 | Connected to: 5V 100% |
|
29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Interf u by claynicholson, MEM by KALTCHUK, Zx2022 by michalin and Zx sizif-128 by UzixLS.
The 628128 in open source designs
The gallery holds 17 open source boards using the 628128 from 17 GitHub repositories; a typical one measures about 115.6 × 100 mm and carries around 41 components.
100% are two-layer designs, the rest use four layers or more, and 59% carry an open source license.
The most starred is Interf u by claynicholson.
Parts used alongside the 628128
Microcontrollers on boards using the 628128
What boards using the 628128 are built for
628128: common questions
Where can I find a 628128 reference design?
Each of the 17 boards on this page is a real design using the 628128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 628128 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF. Counted from the KiCad layouts of 17 open source designs using the 628128.
What parts are used alongside the 628128?
The Z80CPU, 4003APG120, 74HC00, 74LS138 and 74LS139 appear in the most repositories here.
Which microcontrollers do boards using the 628128 use?
Most are built on AVR/Arduino (3) and ESP8266 (2).
How big is a typical board using the 628128?
The median is 115.6 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 628128?
By GitHub stars, Interf u by claynicholson, with 102 stars.
Can I simulate one of these boards using the 628128 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.