9 open source boards using the W65C02

Real designs built with the W65C02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the W65C02

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the W65C02 connects to, and the resistors, capacitors and other passives placed on it.

  • The RDY pin has a pull-up to VCC on 7 of 8 designs, most often 3.3 kΩ (then 1 kΩ).
  • The Φ1 pin is left unconnected on 8 of 8 designs.
  • The Φ2 pin is left unconnected on 8 of 8 designs.
  • The VP pin is left unconnected on 7 of 8 designs.
VPpin 1Connected to: Not connected 88%
RDYpin 2Connected to: A connector 50%
  • Pull-up to VCC on 88% · 3.3 kΩ (3), 1 kΩ (2), 10 kΩ (1)
Φ1pin 3Connected to: Not connected 100%
IRQpin 4Connected to: A connector 63%, WD65C22 38%
  • Pull-up to VCC on 50% · 3.3 kΩ (3)
MLpin 5Connected to: Not connected 88%
NMIpin 6Connected to: A connector 63% · 5V 38%
  • Pull-up to VCC on 50% · 3.3 kΩ (3), 10 kΩ (1)
VDDpin 8Connected to: VCC 100%
VSSpin 21Connected to: GND 100%
NCpin 35Connected to: Not connected 100%
BEpin 36Connected to: A connector 38% · VCC 38%
  • Pull-up to VCC on 50% · 3.3 kΩ (3)
Φ0pin 37Connected to: 74HC00 63%, a connector 50%, WD65C22 38%
  • Series resistor on 38% · 220 Ω (3)
SOpin 38Connected to: Not connected 63% · 5V 25%
Φ2pin 39Connected to: Not connected 100%
RESpin 40Connected to: A connector 50%, WD65C22 38%, LM555 25%
  • Pull-up to VCC on 38% · 1 kΩ (3)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BE6502 SBC by tebl, 65c02board by c0pperdragon, 6502-wozmon by tsanders30004 and ByteCradle 6502 MINI BOARD by ifilot.

The W65C02 in open source designs

The gallery holds 9 open source boards using the W65C02 from 8 GitHub repositories; a typical one measures about 100.3 × 99.7 mm and carries around 48 components.

89% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is BE6502 SBC by tebl.

Microcontrollers on boards using the W65C02

What boards using the W65C02 are built for

W65C02: common questions

Where can I find a W65C02 reference design?

Each of the 9 boards on this page is a real design using the W65C02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the W65C02 RDY pin?

The RDY pin has a pull-up to VCC on 7 of 8 designs, most often 3.3 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the W65C02.

How is the W65C02 Φ1 pin connected?

The Φ1 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the W65C02.

How is the W65C02 Φ2 pin connected?

The Φ2 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the W65C02.

What parts are used alongside the W65C02?

The 74HC00, 28C256, W65C51N, WD65C22 and 62256 appear in the most repositories here.

Which microcontrollers do boards using the W65C02 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the W65C02?

The median is 100.3 × 99.7 mm, and 89% are two-layer designs.

What is the most popular open source board using the W65C02?

By GitHub stars, BE6502 SBC by tebl, with 128 stars.

Can I simulate one of these boards using the W65C02 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part