Fotaoparát

Kybernetika-SPSE·RP-Hovorka·fotaoparát_kicad/fotaoparát.kicad_pcb

Fotaoparát PCB layout, top view — open source ESP32 board by Kybernetika-SPSE

About the Fotaoparát PCB

Fotaoparát is an open source ESP32 PCB design by Kybernetika-SPSE, published on GitHub. It is a 4-layer board measuring 102 × 52.8 mm, with 116 components from 42 distinct parts.

Its main chip is the ESP32_P4, from the ESP32 family. Other key parts include the TLV62569DBV. By type, the board carries 61 capacitors, 26 resistors, 6 connectors, 5 diodes, 4 inductors and 2 switches.

It belongs with the displays & leds designs in this gallery.

From the project

Tak dlouho jsem mlel o foťáku, až jsem si ho navařil.

Fotaoparát©®™ - Projekt protože mám zápal a málo ale i moc peněz. Cíl je sestrojit fotoaparát, s rozhraním, volitelními funkcemi atd. atd. atd.

- Programovatelná tlačítka - Nastavení clony, iso a rychlosti závěrky - display, možná i periferie (blesk, mikrofon, reprák?...) - haha - jak vtipný by bylo kdybych tam dal DOOM? kdybych fakt jo chtěl ---

- [✅] I2C Pull-up rezistory pro kameru - I2CSDA → 4.7kΩ → 3.3V - I2CSCL → 4.7kΩ → 3.3V - Pouzdro: 0402 nebo 0603 - Umístění: blízko kamery nebo ESP32-P4

Main components on the Fotaoparát

Fotaoparát bill of materials (BOM)

116 components, 42 distinct parts.

QtyPartRefs
1
TLV62569DBV
U1
1
Crystal_GND24
Y2
1
Conn_01x08_Pin
J1
3
Conn_01x01_Socket
J2, J3, J5
1
BUTTONS
J4
1
Micro_SD_Card_Det2
J13
1
Conn_01x15_Pin
CAM_IN1
1
AP63203WU
CONV1
2
AP63200WU
CONV2, CONV4
1
Conn_01x15_Socket
DISPLAY_IN1
1
ESDA6V1U1RL
ESD_PROT1
1
ESP32_P4
ESP32_P4
1
W25Q256JVEIQ
ESP_FLASH1
1
TXS0108EPW
LOGIC_CONVERT1
2
SW_MEC_5G
SW1, SW2
1
USB_C_Receptacle_USB2.0_16P
USB-C_2.0
2
D_Schottky
D1, D4
1
5V7 Zener
D2
1
6V2 Zener
D3
1
3v6 Zener
D6
Show 22 more
QtyPartRefs
1
3,9uH
L1
1
2.2uH
L2
2
10uH
L3, L4
33
100nF
C1, C2, C4, C5, C11, C13, C14, C16 +25
4
10uF
C3, C30, C33, C34
6
100nF
C6, C8, C43, C45, C48, C50
3
10uF
C7, C44, C49
8
22uF
C9, C10, C15, C42, C46, C47, C51, C52
4
1uF
C12, C25, C26, C28
2
10pF
C37, C40
1
4.7uF
C41
2
5k1
R1, R9
1
47k
R2
1
270k
R3
2
4.02k
R4, R5
1
16k
R6
1
100k
R7
2
4k7
R8, R13
13
10k
R10, R11, R12, R15, R16, R17, R18, R19 +5
1
167k
R25
1
200k
R26
1
330R
R50

Fotaoparát design files

The KiCad project lives in the Kybernetika-SPSE/RP-Hovorka repository on GitHub; these links point at the commit this page was built from.

Fotaoparát: common questions

What microcontroller does the Fotaoparát use?

The Fotaoparát is built around the ESP32_P4, from the ESP32 family.

How big is the Fotaoparát PCB?

The Fotaoparát measures 102 × 52.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Fotaoparát?

116 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fotaoparát design files?

From the Kybernetika-SPSE/RP-Hovorka repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fotaoparát design in my own project?

The repository has no license, so all rights stay with Kybernetika-SPSE. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fotaoparát without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards