HardLabs

Preprocessor multi aux lpc832

laneboysrc·rc-light-controller·preprocessor/electronics-5ch/LPC832-TSSOP20-version/preprocessor-multi-aux-lpc832.kicad_pcb

Preprocessor multi aux lpc832 PCB layout, top view — open source NXP board by laneboysrc

About the Preprocessor multi aux lpc832 PCB

Preprocessor multi aux lpc832 is an open source NXP PCB design by laneboysrc, published on GitHub under the MIT license. It is a 2-layer board measuring 17 × 24 mm, with 15 components from 14 distinct parts.

Its main chip is the LPC824M201JDH20, from the NXP family. Other key parts include the TLC5940PWPR. By type, the board carries 8 connectors, 3 resistors, 2 ICs and 2 capacitors.

It belongs with the rf & radio designs in this gallery.

From the project

Extensible RC car light controller with Web-based configuration tool

This folder contains KiCAD files for the 5 channel Pre-Processor.

The original design used the TSSOP-16 package of the NXP LPC812 microcontroller. Folder LPC812-TSSOP16-version/

Since the TSSOP-20 version was easier available at distributors, we also designed a PCB for this mircocontroller: LPC812-TSSOP20-version/ We never built this PCB yet ourselves but it is likely to work since it is just a different package.

Main components on the Preprocessor multi aux lpc832

LPC824M201JDH20TLC5940PWPR

Preprocessor multi aux lpc832 bill of materials (BOM)

15 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LPC824M201JDH20
MCP1703T-3302E/CB
U1
1
TLC5940PWPR
LPC832M101FDH20
U2
1
ST-IN
P1
1
ST-OUT
P2
1
TH-IN
P3
1
TH-OUT
P4
1
AUX-IN
P5
1
LIGHT CONTROLLER
P6
1
AUX2-IN
P7
1
AUX3-IN
P8
1
1U/16V
1u
C1
1
47U/6V3
47u/6V3 Polymer 0805
C2
1
100k
R7
2
1K
RN1, RN2

Preprocessor multi aux lpc832 design files

The KiCad project lives in the laneboysrc/rc-light-controller repository on GitHub; these links point at the commit this page was built from.

Preprocessor multi aux lpc832: common questions

What microcontroller does the Preprocessor multi aux lpc832 use?

The Preprocessor multi aux lpc832 is built around the LPC824M201JDH20, from the NXP family.

How big is the Preprocessor multi aux lpc832 PCB?

The Preprocessor multi aux lpc832 measures 17 × 24 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Preprocessor multi aux lpc832?

15 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Preprocessor multi aux lpc832 design files?

From the laneboysrc/rc-light-controller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Preprocessor multi aux lpc832 design in my own project?

Yes, under the terms of its MIT license, which laneboysrc chose for the repository.

Can I test firmware for the Preprocessor multi aux lpc832 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in rc-light-controller

Similar boards