Rc light controller pinheader
About the Rc light controller pinheader PCB
Rc light controller pinheader is an open source NXP PCB design by laneboysrc, published on GitHub under the MIT license. It is a 2-layer board measuring 44 × 23 mm, with 12 components from 11 distinct parts.
Its main chip is the LPC824M201JDH20, from the NXP family. Other key parts include the TLC5940PWPR and MCP1703A-3302_SOT23. By type, the board carries 3 ICs, 3 connectors, 3 capacitors, 2 resistors and 1 transformer.
It belongs with the rf & radio designs in this gallery.
From the project
Extensible RC car light controller with Web-based configuration tool
This is a variant of the DIY RC Light Controller Mk4 where all outputs are available on a standard 2.54 mm pin header.
We are using a microcontroller from NXP: LPC824M101FDH20 (or LPC832M101FDH20) in TSSOP-20 package.
Main components on the Rc light controller pinheader
Rc light controller pinheader bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LPC824M201JDH20 LPC832M101FDH20 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | TLC5940PWPR TLC5940PWP | SOP65P640X120-29N | U2 |
| 1 | MCP1703A-3302_SOT23 | SOT-23W | U3 |
| 1 | Pinheader right-angle 2x17 | PinHeader_2x17_P2.54mm_Horizontal | J1 |
| 2 | Pinheader straight 1x06 | PinHeader_1x06_P2.54mm_Flat | J2, J3 |
| 1 | AO3400 PMV30UN | SOT-23 | T9 |
| 1 | 1U/16V 1u/16V | C_0805_2012Metric | C1 |
| 1 | 47U/6V3 47u/6V3 | C_0805_2012Metric | C2 |
| 1 | 100N 100n | C_0603_1608Metric | C3 |
| 1 | 2k 1% | R_0603_1608Metric | R1 |
| 1 | 1k x4 | R_Array_Convex_4x0603 | RN1 |
Rc light controller pinheader design files
The KiCad project lives in the laneboysrc/rc-light-controller repository on GitHub; these links point at the commit this page was built from.
Rc light controller pinheader: common questions
What microcontroller does the Rc light controller pinheader use?
The Rc light controller pinheader is built around the LPC824M201JDH20, from the NXP family.
How big is the Rc light controller pinheader PCB?
The Rc light controller pinheader measures 44 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rc light controller pinheader?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rc light controller pinheader design files?
From the laneboysrc/rc-light-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rc light controller pinheader design in my own project?
Yes, under the terms of its MIT license, which laneboysrc chose for the repository.
Can I test firmware for the Rc light controller pinheader without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in rc-light-controller
Test jig
100 × 100 mm54 parts2LMIT87
NXPRc light controller tlc5940-lpc832-sbus
29 × 18 mm36 partsMIT87
NXPRc light controller switching
44 × 23 mm18 parts2LMIT87
WCH CH32/CH55xWebusb programmer rev6
38 × 20 mm18 parts2LMIT87
NXPPreprocessor multi aux lpc832
17 × 24 mm15 parts2LMIT87
NXPPreprocessor-3ch lpc832
17 × 17 mm11 parts2LMIT87
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532