Half Life

laret1·Half_Life

Half Life PCB layout, top view — open source ESP32 board by laret1

About the Half Life PCB

Half Life is an open source ESP32 PCB design by laret1, published on GitHub. It is a 2-layer board measuring 118.5 × 78.5 mm, with 6 components from 5 distinct parts.

Its main chip is the DHT11, from the ESP32 family. By type, the board carries 2 connectors, 2 switches, 1 IC and 1 resistor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

El repositorio de hack club half life

Starbie is a little digital pet, kind of like a Tamagotchi. You have to take care of it, play with it, feed it and make sure it gets some rest is so interesant that tamagochi.

The idea behind this project was to make my own version of a digital pet, but also let other people build one themselves. It has a small screen, sensors and a custom PCB, so you can interact with your pet just by moving the device around i really dont know if it work so dont belive in me already.

Half Life, from the project README
From the project README

Main components on the Half Life

Half Life bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DHT11
U1
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10K
R1

Half Life design files

The KiCad project lives in the laret1/Half_Life repository on GitHub; these links point at the commit this page was built from.

Half Life: common questions

What microcontroller does the Half Life use?

The Half Life is built around the DHT11, from the ESP32 family.

How big is the Half Life PCB?

The Half Life measures 118.5 × 78.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Half Life?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Half Life design files?

From the laret1/Half_Life repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Half Life design in my own project?

The repository has no license, so all rights stay with laret1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Half Life without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards