Open-ESP-board
Lasertie·Open-ESP-board·PCB/OpenESPmodule.kicad_pcb
About the Open-ESP-board
Open-ESP-board is an open source ESP32 PCB design by Lasertie, published on GitHub. It is a 2-layer board measuring 34 × 39.5 mm, with 29 components from 17 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the SPX3819M5-L-3-3, MCP9700Ax-HLT, 4N28 and ST1S12XX. By type, the board carries 10 capacitors, 7 resistors, 5 ICs, 2 connectors, 2 switches and 1 battery holder.
From the project
An open sourced board dedicated for DIY project.
Main components on the Open-ESP-board
Open-ESP-board bill of materials (BOM)
29 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U2 |
| 1 | MCP9700Ax-HLT | SOT-353_SC-70-5 | U3 |
| 1 | 4N28 | DIP-6_W7.62mm | U4 |
| 1 | ST1S12XX | TSOT-23-5 | U6 |
| 1 | PINHD_1x15_Female | PinSocket_1x15_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J3 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 2 | SW_Push | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1, SW2 |
| 1 | IR26-21C_L110_TR8 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 2.2u | L_0201_0603Metric | L1 |
| 6 | 100n | C_0201_0603Metric | C1, C2, C5, C7, C8, C9 |
| 3 | 10u | C_0201_0603Metric | C3, C4, C6 |
| 1 | 4.7u | C_0201_0603Metric | C10 |
| 4 | 5k1 | R_0201_0603Metric | R1, R2, R4, R5 |
| 1 | 1k | R_0201_0603Metric | R3 |
| 2 | 100k | R_0201_0603Metric | R6, R7 |
Open-ESP-board design files
The KiCad project lives in the Lasertie/Open-ESP-board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/OpenESPmodule.kicad_pcb
- SchematicPCB/OpenESPmodule.kicad_sch
Open-ESP-board: common questions
What microcontroller does the Open-ESP-board use?
The Open-ESP-board is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Open-ESP-board?
The Open-ESP-board measures 34 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Open-ESP-board?
29 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Open-ESP-board design files?
From the Lasertie/Open-ESP-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Open-ESP-board design in my own project?
The repository has no license, so all rights stay with Lasertie. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Open-ESP-board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k