Lab1
Lavapeeble·elec3117·Labs/Lab1_PCB/Lab1_PCB.kicad_pcb
About the Lab1 PCB
Lab1 is an open source TI MSP430/CC PCB design by Lavapeeble, published on GitHub. It is a 2-layer board measuring 37.6 × 24.6 mm, with 19 components from 15 distinct parts.
Its main chip is the MSP430FR5720IRGE, from the TI MSP430/CC family. Other key parts include the AMS1117-3.3, DHT11 and TMP35. By type, the board carries 9 capacitors, 4 ICs, 3 connectors, 2 resistors and 1 crystal.
Main components on the Lab1
Lab1 bill of materials (BOM)
19 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSP430FR5720IRGE | Texas_RGE0024C_VQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | TMP35 | SOT-23-5_HandSoldering | U4 |
| 1 | Crystal_GND24 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | VBUS_PIN | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | GND_PIN | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | FanPinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 10u | C_0603_1608Metric | C2 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 2 | 10p | C_0402_1005Metric | C5, C6 |
| 1 | 470nF | C_0402_1005Metric | C7 |
| 2 | 4u7 | C_0402_1005Metric | C8, C9 |
| 2 | 100n | C_0402_1005Metric | C10, C11 |
| 2 | 5k | C_0402_1005Metric | R1, R2 |
Lab1 design files
The KiCad project lives in the Lavapeeble/elec3117 repository on GitHub; these links point at the commit this page was built from.
Lab1: common questions
What microcontroller does the Lab1 use?
The Lab1 is built around the MSP430FR5720IRGE, from the TI MSP430/CC family.
How big is the Lab1 PCB?
The Lab1 measures 37.6 × 24.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lab1?
19 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lab1 design files?
From the Lavapeeble/elec3117 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lab1 design in my own project?
The repository has no license, so all rights stay with Lavapeeble. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lab1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in elec3117
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021