Gate
Lavapeeble·elec3117·gate_pcb/gate_pcb/gate_pcb.kicad_pcb
About the Gate PCB
Gate is an open source ESP32 PCB design by Lavapeeble, published on GitHub. It is a 4-layer board measuring 64 × 40.2 mm, with 31 components from 18 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the SUL6001S5-33. By type, the board carries 11 resistors, 8 connectors, 6 capacitors, 4 diodes and 2 ICs.
Main components on the Gate
Gate bill of materials (BOM)
31 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | SUL6001S5-33 | SOT-23-5 | U2 |
| 2 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1, J4 |
| 2 | Fingerprint | PinHeader_1x04_P2.54mm_Vertical | J2, J9 |
| 1 | RFID | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | JTAG | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | oth_display | PinHeader_1x10_P2.54mm_Vertical | J8 |
| 1 | GRN | LED_D3.0mm | D1 |
| 1 | RED | LED_D3.0mm | D2 |
| 2 | D_Schottky | D_SOD-123 | D3, D4 |
| 5 | 1u | C_0603_1608Metric | C1, C2, C3, C5, C6 |
| 1 | 100n | C_0402_1005Metric | C4 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10k | R_0402_1005Metric | R3 |
| 6 | 5.1k | R_0402_1005Metric | R4, R5, R6, R7, R8, R9 |
| 2 | 22 | R_0402_1005Metric | R10, R11 |
Gate design files
The KiCad project lives in the Lavapeeble/elec3117 repository on GitHub; these links point at the commit this page was built from.
Gate: common questions
What microcontroller does the Gate use?
The Gate is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Gate PCB?
The Gate measures 64 × 40.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Gate?
31 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gate design files?
From the Lavapeeble/elec3117 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gate design in my own project?
The repository has no license, so all rights stay with Lavapeeble. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gate without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in elec3117
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k