HardLabs

NetToBOM

Len42·NetToBOM

This repository ships a schematic but no board layout.

About the NetToBOM PCB

NetToBOM is an open source AVR/Arduino PCB design by Len42, published on GitHub under the MIT license. It is a board, with 58 components from 35 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the L78L05_TO92, MCP4822, MCP4821 and TL074. By type, the board carries 20 resistors, 13 capacitors, 8 connectors, 5 ICs, 5 diodes and 3 switches.

From the project

KiCad BOM plug-in

This is my KiCad BOM plug-in. There are many like it but this one is mine. It creates a bill-of-materials file from a KiCad EDA schematic.

Input: Netlist file in XML format (produced by KiCad automatically by the "Generate Bill of Materials" command)

Output: Bill of materials file in CSV format (comma-separated values)

Usage: nettobom [-h] [-o outfile] [infile] -h Include a header section with info about the schematic. -o outfile Write output to the given file; otherwise, write to the console. infile Read input from the given file; otherwise, read from standard input.

Main components on the NetToBOM

L78L05_TO92ATmega328P-PUMCP4822MCP4821TL074

NetToBOM bill of materials (BOM)

58 components, 35 distinct parts.

QtyPartRefs
1
L78L05_TO92
U1
1
ATmega328P-PU
U2
1
MCP4822
U3
1
MCP4821
U4
1
TL074
U5
1
2N3904
Q1
1
16MHz
Y1
1
FTDI
J1
4
WQP-PJ398
J5, J6, J7, J8
1
Eurorack_10
J9
1
Conn_Front
J10
1
Conn_Back
J11
2
10K
RV5, RV7
1
FSM4JRT
SW1
1
10TC412
SW6
1
10TC405
SW8
2
MBR150
D1, D2
1
1N5711
D3
1
1N5711
D4
1
VAOL-5LSBY1
D5
Show 15 more
QtyPartRefs
2
10U
C1, C2
8
100N
C3, C4, C5, C6, C7, C8, C9, C10
3
1N
C11, C12, C13
3
10K
R1, R2, R5
1
10K
R3
2
20K
R4, R8
1
20K
R6
1
20K
R7
3
30K
R9, R10, R11
1
10K
R12
3
30K
R13, R14, R15
2
1K
R16, R18
1
1K
R17
1
100K
R19
1
1K
R20

NetToBOM design files

The KiCad project lives in the Len42/NetToBOM repository on GitHub; these links point at the commit this page was built from.

NetToBOM: common questions

What microcontroller does the NetToBOM use?

The NetToBOM is built around the ATmega328P-PU, from the AVR/Arduino family.

How many components are on the NetToBOM?

58 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the NetToBOM design files?

From the Len42/NetToBOM repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the NetToBOM design in my own project?

Yes, under the terms of its MIT license, which Len42 chose for the repository.

Can I test firmware for the NetToBOM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards