AFE-ECG-PPG-PTT
lengoctuong2005·AFE-ECG-PPG-PTT
About the AFE-ECG-PPG-PTT PCB
AFE-ECG-PPG-PTT is an open source ESP32 PCB design by lengoctuong2005, published on GitHub. It is a 2-layer board measuring 92 × 70 mm, with 35 components from 20 distinct parts.
Its main chip is the ESP32_DEVKIT, from the ESP32 family. Other key parts include the AD8232, ADS1115 and MCP1700-2802E. By type, the board carries 18 resistors, 11 capacitors, 3 ICs and 3 connectors.
From the project
KiCad and ESP32 ECG/PPG PAT research prototype
Đồ án nghiên cứu thu nhận ECG một chuyển đạo bằng AD8232 và ADS1115, kết hợp PPG từ module MAX30102 qua ESP32-DevKitC V4. PAT là thời gian từ đỉnh R ECG đến chân sóng PPG, bao gồm tiền tống máu PEP, không phải PTT thuần.
- AFEECGPPGPTT.kicadpro, .kicadsch, .kicadpcb: thiết kế KiCad 10, bo hai lớp 92 × 70 mm, giảm 19,5% diện tích so với bản đầu 100 × 80 mm. - libs/, sym-lib-table, fp-lib-table: thư viện của dự án và tham chiếu thư viện chuẩn KiCad. - firmware/esp32pttstreamer/: mã ESP-IDF cho ESP32 và kiểm thử host. - software/: bộ đọc telemetry và phân tích dữ liệu mô phỏng; dữ liệu firmware…
Main components on the AFE-ECG-PPG-PTT
AFE-ECG-PPG-PTT bill of materials (BOM)
35 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8232 | LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | ADS1115 | TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | MCP1700-2802E | SOT-23 | U3 |
| 1 | ECG_3.5MM ECG_3.5mm | Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J1 |
| 1 | ESP32_DEVKIT | ESP32_DevKitC_V4_38P | J2 |
| 1 | MAX30102 | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 2 | 0.33U 0.33u | C_0603_1608Metric | C1, C2 |
| 1 | 1n | C_0603_1608Metric | C3 |
| 3 | 0.1U 0.1u | C_0603_1608Metric | C4, C8, C11 |
| 1 | 1.5N 1.5n | C_0603_1608Metric | C5 |
| 2 | 10N 10n | C_0603_1608Metric | C6, C7 |
| 2 | 1u | C_0603_1608Metric | C9, C10 |
| 3 | 360K 360k | R_0603_1608Metric | R1, R2, R3 |
| 6 | 10M | R_0603_1608Metric | R4, R5, R6, R8, R9, R10 |
| 3 | 1M | R_0603_1608Metric | R11, R12, R14 |
| 1 | 100K 100k | R_0603_1608Metric | R13 |
| 1 | 1k | R_0603_1608Metric | R15 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R16, R17 |
| 1 | 1.4M | R_0603_1608Metric | R18 |
| 1 | 10K 10k | R_0603_1608Metric | R19 |
AFE-ECG-PPG-PTT design files
The KiCad project lives in the lengoctuong2005/AFE-ECG-PPG-PTT repository on GitHub; these links point at the commit this page was built from.
AFE-ECG-PPG-PTT: common questions
What microcontroller does the AFE-ECG-PPG-PTT use?
The AFE-ECG-PPG-PTT is built around the ESP32_DEVKIT, from the ESP32 family.
How big is the AFE-ECG-PPG-PTT PCB?
The AFE-ECG-PPG-PTT measures 92 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AFE-ECG-PPG-PTT?
35 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AFE-ECG-PPG-PTT design files?
From the lengoctuong2005/AFE-ECG-PPG-PTT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AFE-ECG-PPG-PTT design in my own project?
The repository has no license, so all rights stay with lengoctuong2005. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AFE-ECG-PPG-PTT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k