8 open source boards using the AD8232
Real designs built with the AD8232, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
AFE-ECG-PPG-PTT
lengoctuong2005
92 × 70 mm35 parts2LNo license1AD8232 Board
EObianom
25.4 × 17.7 mm26 parts4LCC-BY-NC-4.01RP2040/RP2350
Main
SonDinh23
30 × 40 mm116 parts4LGPL-3.00ESP32
XIAO ESP32S3 V1.5
ArticunoFruna
17.8 × 21.1 mm70 parts4LNo license0Nordic nRF
ArrythmiX
TTF-fog
39.5 × 28.5 mm37 parts4LNo license0ESP32
SPECTRA-VASC-
Dharshantech17
38 × 32.5 mm5 parts4LMIT0AD8232 Heart Rate Monitor
ArticunoFruna
35.6 × 27.9 mm38 parts2LNo license0ESP32
SupaClock Carrier v1 - PCB 67x85mm
ArticunoFruna
40 × 48 mm20 parts2LNo license0
How designs wire the AD8232
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AD8232 connects to, and the resistors, capacitors and other passives placed on it.
- The HPDRIVE pin has a series capacitor on 5 of 6 designs, most often 330 nF.
- The +IN pin has a series resistor on 5 of 6 designs, most often 180 kΩ (then 360 kΩ).
- The -IN pin has a series resistor on 5 of 6 designs, most often 180 kΩ (then 360 kΩ).
- The RLDFB pin has a series capacitor on 5 of 6 designs, most often 1 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| HPDRIVEpin 1 | Connected to: Signal 83% · not connected 17% |
|
| +INpin 2 | Connected to: Signal 83% · not connected 17% |
|
| -INpin 3 | Connected to: Signal 83% · not connected 17% |
|
| RLDFBpin 4 | Connected to: Signal 100% |
|
| RLDpin 5 | Connected to: Signal 83% · GND 17% |
|
| SWpin 6 | Connected to: Signal 100% |
|
| OPAMP+pin 7 | Connected to: Signal 100% |
|
| REFOUTpin 8 | Connected to: Signal 100% |
|
| OPAMP-pin 9 | Connected to: Signal 100% |
|
| OUTpin 10 | Connected to: Signal 100% |
|
| SDNpin 13 | Connected to: Signal 60% · not connected 20% · VS_A 20% |
|
| AC/DCpin 14 | Connected to: GND 60% · a signal 40% |
|
| FRpin 15 | Connected to: 3.3V 100% | — |
| GNDpin 16 | Connected to: GND 100% | — |
| +VSpin 17 | Connected to: 3.3V 100% | — |
| REFINpin 18 | Connected to: Signal 100% |
|
| IAOUTpin 19 | Connected to: Signal 100% |
|
| HPSENSEpin 20 | Connected to: Signal 100% |
|
| GND_21pin 21 | Connected to: GND 100% | — |
| GND_PADpin PAD | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AD8232 Board by EObianom, AFE-ECG-PPG-PTT by lengoctuong2005, AD8232 Heart Rate Monitor by ArticunoFruna and SPECTRA-VASC- by Dharshantech17.
The AD8232 in open source designs
The gallery holds 8 open source boards using the AD8232 from 6 GitHub repositories; a typical one measures about 36.8 × 30.5 mm and carries around 36 components.
63% use four copper layers or more, and 25% carry an open source license.
The most starred is AFE-ECG-PPG-PTT by lengoctuong2005.
Microcontrollers on boards using the AD8232
What boards using the AD8232 are built for
AD8232: common questions
Where can I find a AD8232 reference design?
Each of the 8 boards on this page is a real design using the AD8232. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AD8232 HPDRIVE pin connected?
The HPDRIVE pin has a series capacitor on 5 of 6 designs, most often 330 nF. Counted from the KiCad layouts of 6 open source designs using the AD8232.
What resistor goes on the AD8232 +IN pin?
The +IN pin has a series resistor on 5 of 6 designs, most often 180 kΩ (then 360 kΩ). Counted from the KiCad layouts of 6 open source designs using the AD8232.
What resistor goes on the AD8232 -IN pin?
The -IN pin has a series resistor on 5 of 6 designs, most often 180 kΩ (then 360 kΩ). Counted from the KiCad layouts of 6 open source designs using the AD8232.
Which microcontrollers do boards using the AD8232 use?
Most are built on ESP32 (4), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the AD8232?
The median is 36.8 × 30.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the AD8232?
By GitHub stars, AFE-ECG-PPG-PTT by lengoctuong2005, with 1 stars.
Can I simulate one of these boards using the AD8232 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.