EW-Eurorack-Power Breakout
leonvanbokhorst·EW-Eurorack-Power_Breakout
About the EW-Eurorack-Power Breakout
EW-Eurorack-Power Breakout is an open source PCB design by leonvanbokhorst, published on GitHub. It is a 2-layer board measuring 48.3 × 38.1 mm, with 15 components from 9 distinct parts.
Other key parts include the LM7805. By type, the board carries 6 connectors, 4 capacitors, 2 diodes, 2 resistors and 1 IC.
It belongs with the dev boards & breakouts, audio and power & battery designs in this gallery.
From the project
A simple breakout module to easily get your Eurorack power supply on your breadboard
Main components on the EW-Eurorack-Power Breakout
EW-Eurorack-Power Breakout bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 | TO-220_Vertical | U1 |
| 1 | CONN_02X08 | IDC_Header_Straight_16pins | J1 |
| 4 | JACK_2P | PJ301M-12 | J2, J3, J4, J5 |
| 1 | CONN_01X14 | Pin_Header_Straight_1x14_Pitch2.54mm | J6 |
| 2 | 1N4001 | D_DO-41_SOD81_P12.70mm_Horizontal | D1, D2 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | 330nF | C_Disc_D6.0mm_W4.4mm_P5.00mm | C3 |
| 1 | 100nF | C_Disc_D6.0mm_W4.4mm_P5.00mm | C4 |
| 2 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
EW-Eurorack-Power Breakout design files
The KiCad project lives in the leonvanbokhorst/EW-Eurorack-Power_Breakout repository on GitHub; these links point at the commit this page was built from.
EW-Eurorack-Power Breakout: common questions
How big is the EW-Eurorack-Power Breakout?
The EW-Eurorack-Power Breakout measures 48.3 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EW-Eurorack-Power Breakout?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the EW-Eurorack-Power Breakout design files?
From the leonvanbokhorst/EW-Eurorack-Power_Breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EW-Eurorack-Power Breakout design in my own project?
The repository has no license, so all rights stay with leonvanbokhorst. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k