Array-Blackbody-A
lhr-solar·Array-Blackbody-A-PCB
About the Array-Blackbody-A PCB
Array-Blackbody-A is an open source PCB design by lhr-solar, published on GitHub. It is a 2-layer board measuring 80 × 100 mm, with 103 components from 46 distinct parts.
Other key parts include the Nucleo_L432KC, PWR_REG_PQMC3-Dx-Sx-S, ADM3055E and CDSOT23-T24CAN. By type, the board carries 12 test points, 12 capacitors, 11 resistors, 6 LEDs, 5 connectors and 4 ICs.
It belongs with the sensors designs in this gallery.
From the project
Temperature interface board for the Array
This repository contains the following files for the RTD/Irradiance Sensor HW:
Also a good resource is the Irradiance/RTD Board Parts List; this is the source of truth for the schematic and layout and should be consulted and updated by anyone doing revisions on the board. As good practice, make sure your updates to the parts list, when finalized, gets a new named version in the version history.
Main components on the Array-Blackbody-A
Array-Blackbody-A bill of materials (BOM)
103 components, 46 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Nucleo_L432KC | MODULE_NUCLEO-L432KC | U1 |
| 1 | PWR_REG_PQMC3-Dx-Sx-S | 490_PQMC3_D12_S12_S | U2 |
| 1 | ADM3055E | ADM3055EBRIZ | U3 |
| 1 | CDSOT23-T24CAN | SOT-23 | U4 |
| 2 | Conn_01x02 | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J1, J2 |
| 1 | Car Power | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J3 |
| 1 | CAN_In | Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J4 |
| 1 | CAN_Out | Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J5 |
| 1 | Termination Resistors | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 24 | 100nF | C_0805_2012Metric | RTD0_C1, RTD0_C2, RTD0_C3, RTD1_C1, RTD1_C2, RTD1_C3, RTD2_C1, RTD2_C2 +16 |
| 8 | Conn_01x04 | Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | RTD0_J1, RTD1_J1, RTD2_J1, RTD3_J1, RTD4_J1, RTD5_J1, RTD6_J1, RTD7_J1 |
| 8 | 400 | R_0805_2012Metric | RTD0_R1, RTD1_R1, RTD2_R1, RTD3_R1, RTD4_R1, RTD5_R1, RTD6_R1, RTD7_R1 |
| 8 | MAX31865xAP | SSOP-20_5.3x7.2mm_P0.65mm | RTD0_U1, RTD1_U1, RTD2_U1, RTD3_U1, RTD4_U1, RTD5_U1, RTD6_U1, RTD7_U1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | Car +12V | TestPoint_Keystone_5005-5009_Compact | TP1 |
| 1 | Car GND | TestPoint_Keystone_5005-5009_Compact | TP2 |
| 1 | +9VA | TestPoint_Keystone_5005-5009_Compact | TP3 |
| 1 | Device GND | TestPoint_Keystone_5005-5009_Compact | TP4 |
| 1 | CAN_Tx | TestPoint_Keystone_5005-5009_Compact | TP5 |
| 1 | CAN_Rx | TestPoint_Keystone_5005-5009_Compact | TP6 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAN_ISO_Vout | TestPoint_Keystone_5005-5009_Compact | TP7 |
| 1 | CAN_ISO_Vin | TestPoint_Keystone_5005-5009_Compact | TP8 |
| 1 | CAN_ISO_GndIn | TestPoint_Keystone_5005-5009_Compact | TP9 |
| 1 | CAN_ISO_GndOut | TestPoint_Keystone_5005-5009_Compact | TP10 |
| 1 | CAN_H | TestPoint_Keystone_5005-5009_Compact | TP11 |
| 1 | CAN_L | TestPoint_Keystone_5005-5009_Compact | TP12 |
| 1 | Car Power Live (Green) | LED_0805_2012Metric | LED1 |
| 1 | Device 9V Live (Green) | LED_0805_2012Metric | LED2 |
| 1 | CAN_Rx (Blue) | LED_0805_2012Metric | LED3 |
| 1 | CAN_Tx (Blue) | LED_0805_2012Metric | LED4 |
| 1 | Tracking (Blue) | LED_0805_2012Metric | LED5 |
| 1 | Error (Amber) | LED_0805_2012Metric | LED6 |
| 1 | 4.7uH | L_0805_2012Metric | L1 |
| 2 | 1.8kH | L_0805_2012Metric | L2, L3 |
| 2 | 100uF | C_1210_3225Metric | C1, C4 |
| 1 | 47uF | C_1210_3225Metric | C2 |
| 3 | 10uF | C_0805_2012Metric | C3, C5, C10 |
| 3 | 0.1uF | C_0805_2012Metric | C6, C7, C12 |
| 2 | 0.01uF | C_0805_2012Metric | C8, C11 |
| 1 | 0.22uF | C_0805_2012Metric | C9 |
| 2 | 4.7k | R_0805_2012Metric | R1, R2 |
| 1 | 1.5K | R_0805_2012Metric | R3 |
| 1 | 1.1K | R_0805_2012Metric | R4 |
| 4 | 330 | R_0805_2012Metric | R5, R6, R7, R8 |
| 1 | 0 | R_0805_2012Metric | R9 |
| 2 | 60 | R_0805_2012Metric | R10, R11 |
Array-Blackbody-A design files
The KiCad project lives in the lhr-solar/Array-Blackbody-A-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutRTDTemp.kicad_pcb
Array-Blackbody-A: common questions
How big is the Array-Blackbody-A PCB?
The Array-Blackbody-A measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Array-Blackbody-A?
103 components, from 46 distinct parts. The full bill of materials is listed on this page.
Where can I download the Array-Blackbody-A design files?
From the lhr-solar/Array-Blackbody-A-PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Array-Blackbody-A design in my own project?
The repository has no license, so all rights stay with lhr-solar. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956