Analog front end lab

limatthew01-hue·analog-front-end-lab·projects/sensor-interface-pcb/sensor-interface.kicad_pcb

Analog front end lab PCB layout, top view — open source board by limatthew01-hue

About the Analog front end lab PCB

Analog front end lab is an open source PCB design by limatthew01-hue, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 14 components from 9 distinct parts.

Other key parts include the MCP6002-I/SN. By type, the board carries 6 resistors, 4 capacitors, 3 connectors and 1 IC.

It belongs with the sensors designs in this gallery.

From the project

A 60 × 40 mm, two-layer board for connecting two slow, positive voltage signals to a NUCLEO-F401RE. Each channel has a 2:1 resistor divider, an MCP6002 voltage follower, and a 10 kΩ / 1 µF output filter. The MCU stays on the Nucleo board; a four-wire harness carries power, ground

A 60 × 40 mm, two-layer board for connecting two slow, positive voltage signals to a NUCLEO-F401RE. Each channel has a 2:1 resistor divider, an MCP6002 voltage follower, and a 10 kΩ / 1 µF output filter. The MCU stays on the Nucleo board; a four-wire harness carries power, ground and the two ADC inputs.

Revision A is a CAD prototype. It has not been fabricated, assembled or measured. KiCad checks and an ideal-buffer simulation are complete; they do not establish hardware performance or production readiness.

Main components on the Analog front end lab

Analog front end lab bill of materials (BOM)

14 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP6002-I/SN
U1
1
MCU: 3V3 / GND / A0 / A1
J1
1
INPUT0 0-6V
J2
1
INPUT1 0-6V
J3
1
100n X7R 10V+
C1
2
1u X7R 10V+
C2, C3
1
4.7u X7R 10V+
C4
4
33k 1%
R1, R2, R3, R4
2
10k 1%
R5, R6

Analog front end lab design files

The KiCad project lives in the limatthew01-hue/analog-front-end-lab repository on GitHub; these links point at the commit this page was built from.

Analog front end lab: common questions

How big is the Analog front end lab PCB?

The Analog front end lab measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Analog front end lab?

14 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Analog front end lab design files?

From the limatthew01-hue/analog-front-end-lab repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Analog front end lab design in my own project?

The repository has no license, so all rights stay with limatthew01-hue. Use it as a reference, and ask the author before reusing the design.

Similar boards