8 open source boards using the NCP1117-5V

Real designs built with the NCP1117-5V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The NCP1117-5V in open source designs

The gallery holds 8 open source boards using the NCP1117-5V from 3 GitHub repositories; a typical one measures about 44.3 × 25.5 mm and carries around 24 components.

88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is Dual button doorbell by espena.

Microcontrollers on boards using the NCP1117-5V

What boards using the NCP1117-5V are built for

NCP1117-5V: common questions

Where can I find a NCP1117-5V reference design?

Each of the 8 boards on this page is a real design using the NCP1117-5V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NCP1117-5V use?

Most are built on AVR/Arduino (7) and ESP32 (1).

How big is a typical board using the NCP1117-5V?

The median is 44.3 × 25.5 mm, and 88% are two-layer designs.

What is the most popular open source board using the NCP1117-5V?

By GitHub stars, Dual button doorbell by espena, with 26 stars.

Can I simulate one of these boards using the NCP1117-5V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part