HardLabs

Lora guide forge hackclub

lizardman343242·Lora-guide-forge-hackclub

Lora guide forge hackclub PCB layout, top view — open source RP2040/RP2350 board by lizardman343242

About the Lora guide forge hackclub PCB

Lora guide forge hackclub is an open source RP2040/RP2350 PCB design by lizardman343242, published on GitHub. It is a 4-layer board measuring 37 × 41.5 mm, with 49 components from 30 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SX1262IMLTRT, PE4259, W25Q128JVS and AP2112K-3.3. By type, the board carries 25 capacitors, 8 resistors, 5 ICs, 4 inductors, 2 crystals and 2 switches.

It belongs with the rf & radio designs in this gallery.

From the project

Bom Table --- | Id | Designator | Footprint | Quantity | Designation | Supplier and ref | |----|------------|-----------|----------|--------------|-------------------| | 1 | AE1 | PinSocket1x01P2.54mmVertical | 1 | Antenna | | | 2 | C2, C3 | C04021005Metric | 2 | 100nf | https://

Bom Table --- | Id | Designator | Footprint | Quantity | Designation | Supplier and ref | |----|------------|-----------|----------|--------------|-------------------| | 1 | AE1 | PinSocket1x01P2.54mmVertical | 1 | Antenna | | | 2 | C2, C3 | C04021005Metric | 2 | 100nf | https://jlcpcb.com/partdetail/1877-CL05B104KO5NNNC/C1525| | 3 | C4 | C04021005Metric | 1 | 470nF | https://jlcpcb.com/partdetail/48344-CL05A474KP5NNNC/C47339| | 4 | C5, C6 | C04021005Metric | 2 | 47pF | https://jlcpcb.com/partdetail/1919-0402CG470J500NT/C1567| | 5 | C7 | C04021005Metric | 1 | 1nf |…

Lora guide forge hackclub, from the project README
From the project README

Main components on the Lora guide forge hackclub

SX1262IMLTRTRP2040PE4259W25Q128JVSAP2112K-3.3

Lora guide forge hackclub bill of materials (BOM)

49 components, 30 distinct parts.

QtyPartRefs
1
SX1262IMLTRT
U1
1
RP2040
U2
1
PE4259
U3
1
W25Q128JVS
U4
1
AP2112K-3.3
U5
1
32MHz
Y1
1
12MHz
Y2
1
USB_C_Receptacle_USB2.0_16P
J1
1
Antenna
AE1
1
0900FM15K0039
FL1
1
BOOT
SW1
1
RESET
SW2
1
BLM15AX102SN1D
FB2
1
15uH
L1
1
47nH
L2
1
9.1nH
L3
12
100nF
C2, C3, C11, C12, C13, C14, C15, C16 +4
1
470nF
C4
2
47pF
C5, C6
1
1nf
C7
Show 10 more
QtyPartRefs
1
39pF
C8
2
3.3pf
C9, C10
2
1uF
C18, C29
2
15pF
C22, C23
2
10uf
C25, C26
1
100
R1
1
10k
R2
2
27.4
R3, R4
2
1K
R5, R6
2
5.1k
R7, R8

Lora guide forge hackclub design files

The KiCad project lives in the lizardman343242/Lora-guide-forge-hackclub repository on GitHub; these links point at the commit this page was built from.

Lora guide forge hackclub: common questions

What microcontroller does the Lora guide forge hackclub use?

The Lora guide forge hackclub is built around the RP2040, from the RP2040/RP2350 family.

How big is the Lora guide forge hackclub PCB?

The Lora guide forge hackclub measures 37 × 41.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Lora guide forge hackclub?

49 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lora guide forge hackclub design files?

From the lizardman343242/Lora-guide-forge-hackclub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Lora guide forge hackclub design in my own project?

The repository has no license, so all rights stay with lizardman343242. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lora guide forge hackclub without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards