HardLabs

Rin-Tin-Tin-RTT-

LMJesusGG·Rin-Tin-Tin-RTT-·Hardware/Diseño PCB/KiCAD_RTT/rtt.kicad_pcb

Rin-Tin-Tin-RTT- PCB layout, top view — open source ESP32 board by LMJesusGG

About the Rin-Tin-Tin-RTT- PCB

Rin-Tin-Tin-RTT- is an open source ESP32 PCB design by LMJesusGG, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 60 mm, with 13 components from 10 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the LM7805_TO220 and L293D. By type, the board carries 5 capacitors, 3 ICs, 3 connectors, 1 transistor and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

Battlebot tipo drum spinner inspirado en el Minotaur.

Main components on the Rin-Tin-Tin-RTT-

LM7805_TO220L293DESP32-DEVKIT-V1

Rin-Tin-Tin-RTT- bill of materials (BOM)

13 components, 10 distinct parts.

QtyPartRefs
1
LM7805_TO220
U1
1
L293D
U2
1
ESP32-DEVKIT-V1
U3
1
2n2222a
Q2
1
Screw_Terminal_01x04
J1
1
bateria_9v
J2
1
motor_fuerza
J3
3
C
C1, C2, C5
2
C_Polarized
C3, C4
1
R
R1

Rin-Tin-Tin-RTT- design files

The KiCad project lives in the LMJesusGG/Rin-Tin-Tin-RTT- repository on GitHub; these links point at the commit this page was built from.

Rin-Tin-Tin-RTT-: common questions

What microcontroller does the Rin-Tin-Tin-RTT- use?

The Rin-Tin-Tin-RTT- is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Rin-Tin-Tin-RTT- PCB?

The Rin-Tin-Tin-RTT- measures 70 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rin-Tin-Tin-RTT-?

13 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rin-Tin-Tin-RTT- design files?

From the LMJesusGG/Rin-Tin-Tin-RTT- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rin-Tin-Tin-RTT- design in my own project?

Yes, under the terms of its MIT license, which LMJesusGG chose for the repository.

Can I test firmware for the Rin-Tin-Tin-RTT- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards