Polaris
Longhorn-Rocketry-Electronics·Polaris·chronos-polaris-hardware/chronos-polaris-hardware.kicad_pcb
About the Polaris PCB
Polaris is an open source ESP32 PCB design by Longhorn-Rocketry-Electronics, published on GitHub. It is a 2-layer board measuring 30 × 50 mm, with 58 components from 28 distinct parts.
Its main chip is the ESP32-S2-SOLO-2-N4, from the ESP32 family. Other key parts include the TPS62172DSGR, BMI088, BMP280, C393941 and TLV62130RGTR. By type, the board carries 23 resistors, 12 ICs, 12 capacitors, 8 connectors and 2 inductors.
From the project
Model rocketry flight computer schematics and code for dual deploy and logging
Main components on the Polaris
Polaris bill of materials (BOM)
58 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS62172DSGR | WSON-8_L2.0-W2.0-P0.50-TL-EP | U1 |
| 1 | ESP32-S2-SOLO-2-N4 | WIRELM-SMD_ESP32-S3-WROOM-1 | U2 |
| 1 | BMI088 | LGA-16_L4.5-W3.0-P0.50-BL | U3 |
| 1 | BMP280 | LGA-8_L2.5-W2.0-P0.65_AMP6127 | U4 |
| 1 | C393941 TF_PUSH | TF-SMD_TF-PUSH | U5 |
| 1 | TLV62130RGTR | QFN-16_L3.0-W3.0-P0.50-TL-EP | U6 |
| 2 | AP20P30Q | DFN-8_L3.3-W3.0-P0.65-LS3.3-BL-EP | U7, U12 |
| 1 | 2N7002KDW_72K | SOT-363_L2.1-W1.3-P0.65-LS2.3-BL | U8 |
| 1 | MSK12C02-HB | SW-TH_MSK12C02-HB-1 | U10 |
| 1 | FC-B1010RGBT-HG | LED-ARRAY-SMD_4P-L1.0-W1.0-TR-RD | U14 |
| 1 | TYPE-C_14PLC-H10_0 | USB-C-TH_SHOUHAN_TYPE-C-14PLC-H10.0 | U15 |
| 5 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 2 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 1 | WJ124-3_81-6P | CONN-TH_6P-P3.81_WJ124-3.81-6P | P1 |
| 1 | HNB09A03 | BUZ-TH_BD9.0-P5.00-D0.6-FD | BUZ1 |
| 1 | 2.2UH 2.2uH | IND-SMD_L3.0-W3.0 | L1 |
| 1 | 2.2UH 2.2uH | IND-SMD_L4.0-W4.0 | L2 |
| 2 | 22UF 22uF | C_0603_1608Metric | C1, C3 |
| 2 | 10UF 10uF | C_0805_2012Metric | C2, C4 |
| 7 | 100NF 100nF | C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C12 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.3NF 3.3nF | C_0402_1005Metric | C11 |
| 2 | 100K 100k | R_0603_1608Metric | R1, R19 |
| 11 | 10K 10k | R_0603_1608Metric | R2, R3, R4, R5, R6, R8, R15, R16 +3 |
| 4 | 30K 30k | R_0603_1608Metric | R7, R14, R17, R22 |
| 2 | 51 | R_0603_1608Metric | R9, R10 |
| 1 | 100 | R_0603_1608Metric | R11 |
| 2 | 0603WAF5101T5E | R0603 | R12, R13 |
| 1 | 160K 160k | R_0603_1608Metric | R20 |
Polaris design files
The KiCad project lives in the Longhorn-Rocketry-Electronics/Polaris repository on GitHub; these links point at the commit this page was built from.
Polaris: common questions
What microcontroller does the Polaris use?
The Polaris is built around the ESP32-S2-SOLO-2-N4, from the ESP32 family.
How big is the Polaris PCB?
The Polaris measures 30 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Polaris?
58 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Polaris design files?
From the Longhorn-Rocketry-Electronics/Polaris repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Polaris design in my own project?
The repository has no license, so all rights stay with Longhorn-Rocketry-Electronics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Polaris without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k