Crino temp ecad

LPfueller·crino-temp-ecad·hardware/template.kicad_pcb

Crino temp ecad PCB layout, top view — open source ESP32 board by LPfueller

About the Crino temp ecad PCB

Crino temp ecad is an open source ESP32 PCB design by LPfueller, published on GitHub. It is a 4-layer board measuring 105 × 75 mm, with 74 components from 43 distinct parts.

Its main chip is the ESP32-WROVER-IE-N4R8, from the ESP32 family. Other key parts include the AG9912M, RTL8201F-VB-CG, SY8120IABC, PAC1932T-I/JQ and PCA9536TK,118. By type, the board carries 25 capacitors, 25 resistors, 6 ICs, 6 diodes, 6 inductors and 3 connectors.

It belongs with the iot & wireless, power & battery and test & measurement designs in this gallery.

From the project

Crino offers precise characterisations of lithium ion cells for quality control in battery manufacturing and research using the crino instrument. Every crino instrument consists of several crino boards with actuators and sensors that are connected to a central control system (cur

Crino offers precise characterisations of lithium ion cells for quality control in battery manufacturing and research using the crino instrument. Every crino instrument consists of several crino boards with actuators and sensors that are connected to a central control system (currently a Raspberry Pi). This control system is performing all measurements and also provides a user interface to interact with the system. This repository consists of Kicad development files for the board-template. All crino boards should be derived from this template.

Crino temp ecad, from the project README
From the project README

Main components on the Crino temp ecad

Crino temp ecad bill of materials (BOM)

74 components, 43 distinct parts.

QtyPartRefs
1
AG9912M
IC1
1
RTL8201F-VB-CG
IC2
1
SY8120IABC
SY8120B1ABC
IC3
1
PAC1932T-I/JQ
U1
1
ESP32-WROVER-IE-N4R8
ESP32-WROVER-E-N4R8
U2
1
PCA9536TK,118
PCA9536TK
U3
1
S5D50.000000B20F30T
SG-5032CCN
X1
1
JXD1-0009NL
J1
1
SHF-108-01-L-D-SM
J2
1
SHF-103-01-L-D-SM
J3
1
SolderJumper_2_Open
JP1
1
TS-1187A-B-A-B
SW_Push
SW1
1
SMAJ58A-TP
D_Schottky
D1
1
TPRCLAMP3374N
RCLAMP3374N.TCT
D2
2
TJ-S3210SW5TGLC2G-A5
LED_GREEN
D3, D4
2
TJ-S3210SW5TGLC6B-A5
LED_BLUE
D5, D6
4
BLM31KN102SN1L
FerriteBead
FB1, FB2, FB3, FB4
1
UPZ2012E601-2R0TF
FerriteBead
FB5
1
SLW4020S4R7MST
4.7u
L1
2
1206B472K202NT
4.7n
C1, C2
Show 23 more
QtyPartRefs
1
GRM21BR61E106KA73L
10u
C3
1
RVT1E100M0505
100u
C4
1
CL10C220JB8NNNC
22p
C5
12
CC0603KRX7R9BB104
100n
C6, C7, C9, C11, C12, C13, C14, C15 +4
2
CL10A476MQ8QRNC
47u
C8, C10
1
CL10A475KO8NNNC
4.7u
C16
2
CL21B104KCFNNNE
100n
C17, C21
1
CL31A226KOHNNNE
22u
C19
1
CL10A105KB8NNNC
1u
C22
1
CL10A226MQ8NRNC
22u
C23
2
0603WAF2700T5E
270
R1, R2
4
0603WAF499JT5E
49.9
R3, R4, R5, R6
4
0603WAF4701T5E
4.7k
R7, R8, R9, R10
1
0603WAF2491T5E
2.49k
R11
3
0603WAF0000T5E
0
R12, R13, R14
1
SR732ATTDR680F
0.68
R15
1
0603WAF2201T5E
2.2k
R16
2
0603WAF5601T5E
5.6k
R17, R18
1
0603WAF1003T5E
100k
R19
1
0603WAF2212T5E
22.1k
R20
1
0603WAF1002T5E
10k
R21
2
0603WAF1000T5E
100
R22, R23
2
ERJP06F7500V
750
R24, R25

Crino temp ecad design files

The KiCad project lives in the LPfueller/crino-temp-ecad repository on GitHub; these links point at the commit this page was built from.

Crino temp ecad: common questions

What microcontroller does the Crino temp ecad use?

The Crino temp ecad is built around the ESP32-WROVER-IE-N4R8, from the ESP32 family.

How big is the Crino temp ecad PCB?

The Crino temp ecad measures 105 × 75 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Crino temp ecad?

74 components, from 43 distinct parts. The full bill of materials is listed on this page.

Where can I download the Crino temp ecad design files?

From the LPfueller/crino-temp-ecad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Crino temp ecad design in my own project?

The repository has no license, so all rights stay with LPfueller. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Crino temp ecad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards