2 open source boards using the PAC1932T-I/JQ

Real designs built with the PAC1932T-I/JQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PAC1932T-I/JQ in open source designs

The gallery holds 2 open source boards using the PAC1932T-I/JQ from 2 GitHub repositories; a typical one measures about 105 × 75 mm and carries around 74 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Cadlab test by LPfueller.

Microcontrollers on boards using the PAC1932T-I/JQ

What boards using the PAC1932T-I/JQ are built for

PAC1932T-I/JQ: common questions

Where can I find a PAC1932T-I/JQ reference design?

Each of the 2 boards on this page is a real design using the PAC1932T-I/JQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PAC1932T-I/JQ?

The AG9912M, ESP32-WROVER-IE-N4R8, PCA9536TK,118, RTL8201F-VB-CG and SY8120IABC appear in the most repositories here.

Which microcontrollers do boards using the PAC1932T-I/JQ use?

Most are built on ESP32 (2).

How big is a typical board using the PAC1932T-I/JQ?

The median is 105 × 75 mm, and 0% are two-layer designs.

What is the most popular open source board using the PAC1932T-I/JQ?

By GitHub stars, Cadlab test by LPfueller, with 0 stars.

Can I simulate one of these boards using the PAC1932T-I/JQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part