ExED

lucaci32u4·ExED·Schematic/exed.kicad_pcb

ExED PCB layout, top view — open source board by lucaci32u4

About the ExED PCB

ExED is an open source PCB design by lucaci32u4, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 117.2 × 115.1 mm, with 135 components from 34 distinct parts.

Other key parts include the LM7805_TO220, NE555P, 74LS00, 74HC595 and 4017. By type, the board carries 69 resistors, 22 diodes, 19 capacitors, 15 connectors, 7 ICs and 2 transistors.

From the project

Extended Digital Electronics Laboratory

This laboratory is intended to be used as teaching material for the 6th Digital Electronics laboratory in the Faculty of Computer Science, Politehnica University of Bucharest.

This laboratory material presents the functioning of a shift register, a ring counter and a phase-locked loop. The following applications can be built:

A semaphore-like appliance using a ring counter A clock divider Phase-locked loop used to correct the pulse width of a fixed-frequency input signal Clock multiplier bult using the phase-locked loop and clock divider * Linear feedback shift register - a random number…

ExED, from the project README
From the project README

Main components on the ExED

ExED bill of materials (BOM)

135 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM7805_TO220
U1
2
NE555P
U2, U5
1
74LS00
U3
1
74HC595
U4
1
4017
U6
1
4046
U7
2
PN2222A
Q1, Q2
1
BananaPlus
J1
1
BananaMinus
J2
1
ShiftInput
J3
1
XOR
J4
1
LogicHigh
J5
1
ShiftOutput
J6
2
Clocks
J7, J8
2
PLLDivider
J9, J10
1
CounterControl
J11
1
CounterOutput
J12
1
PLLOutput
J13
1
PLLOutput
J14
1
LogicLow
J15
Show 14 more
QtyPartRefs
1
Manual
SW1
21
LED
D1, D2, D3, D4, D5, D6, D7, D8 +13
1
1N4001
D22
9
1u
C1, C2, C5, C6, C9, C11, C13, C16 +1
3
10N
10n
C3, C7, C10
6
100N
100n
C4, C8, C12, C15, C17, C19
1
1NF
1nF
C14
21
330
R1, R23, R24, R25, R26, R27, R28, R29 +13
2
1k
R2, R33
1
500
330
R3
11
10K
10k
R4, R5, R6, R7, R10, R11, R34, R35 +3
4
47K
47k
R8, R9, R21, R22
28
100
R12, R13, R14, R15, R16, R17, R18, R19 +20
2
100K
100k
R36, R46

ExED design files

The KiCad project lives in the lucaci32u4/ExED repository on GitHub; these links point at the commit this page was built from.

ExED: common questions

How big is the ExED PCB?

The ExED measures 117.2 × 115.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ExED?

135 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ExED design files?

From the lucaci32u4/ExED repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ExED design in my own project?

Yes, under the terms of its GPL-3.0 license, which lucaci32u4 chose for the repository.