10 open source boards using the 4046
Real designs built with the 4046, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sstc
hnaderi
100 × 80 mm102 parts2LCC0-1.03- schematic only · 794 parts
Quad bass lead drum generator
JordanAceto
794 parts2LNo license3 FM modulation and demodulation circuit
kogeicollins
69 × 32.5 mm22 parts2LNo license1ExED
lucaci32u4
117.2 × 115.1 mm135 parts2LGPL-3.00MPXDecorder-V2
akira345
100 × 84.2 mm119 parts2LNo license0Lickshot dub siren
Orald-0
99.1 × 63.5 mm78 parts2LMIT0Analog Project PLL
Pranay-Patil2006
95 × 97.5 mm35 parts2LNo license0V01
blthree
78.4 × 65.5 mm84 parts2LNo license0Vco4069
blthree
99.1 × 99.1 mm84 parts2LNo license0- schematic only · 175 parts
Building blocks
lennartquerter
175 parts2LCC-BY-NC-4.012
How designs wire the 4046
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 4046 connects to, and the resistors, capacitors and other passives placed on it.
- The C1 pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 1 nF).
- The C2 pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 1 nF).
- The PCP pin is left unconnected on 7 of 7 designs.
- The ZOUT pin is left unconnected on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PCPpin 1 | Connected to: Not connected 100% | — |
| PC1pin 2 | Connected to: Not connected 71% · a signal 29% | — |
| C1pin 6 | Connected to: Signal 86% |
|
| C2pin 7 | Connected to: Signal 86% |
|
| VSSpin 8 | Connected to: GND 86% | — |
| VCOINpin 9 | Connected to: Signal 71% |
|
| SFOUTpin 10 | Connected to: Not connected 86% | — |
| PC2pin 13 | Connected to: Not connected 57% · a signal 43% |
|
| ZOUTpin 15 | Connected to: Not connected 100% | — |
| VDDpin 16 | Connected to: 5V 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sstc by hnaderi, FM modulation and demodulation circuit pcb by kogeicollins, MPXDecorder-V2 by akira345 and V01 by blthree.
The 4046 in open source designs
The gallery holds 10 open source boards using the 4046 from 9 GitHub repositories; a typical one measures about 99.1 × 82.1 mm and carries around 93 components.
100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Building blocks by lennartquerter.
Parts used alongside the 4046
What boards using the 4046 are built for
4046: common questions
Where can I find a 4046 reference design?
Each of the 10 boards on this page is a real design using the 4046. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4046 C1 pin connected?
The C1 pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 1 nF). Counted from the KiCad layouts of 7 open source designs using the 4046.
How is the 4046 C2 pin connected?
The C2 pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 1 nF). Counted from the KiCad layouts of 7 open source designs using the 4046.
How is the 4046 PCP pin connected?
The PCP pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 4046.
What parts are used alongside the 4046?
The TL072, LM7805_TO220, 74HC74 and TL074 appear in the most repositories here.
How big is a typical board using the 4046?
The median is 99.1 × 82.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the 4046?
By GitHub stars, Building blocks by lennartquerter, with 12 stars.
Can I simulate one of these boards using the 4046 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.