HardLabs

DribblerESCBoard

luhbots·luhsoccer_electronics·DribblerEscBoard/DribblerEscBoardV1.kicad_pcb

DribblerESCBoard PCB layout, top view — open source RP2040/RP2350 board by luhbots

About the DribblerESCBoard PCB

DribblerESCBoard is an open source RP2040/RP2350 PCB design by luhbots, published on GitHub. It is a 2-layer board measuring 27 × 49 mm, with 30 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and AP1117-33. By type, the board carries 16 capacitors, 5 connectors, 4 ICs, 2 switches, 2 resistors and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

From the project

The eletronics projects of our robots and basestation.

Main components on the DribblerESCBoard

RP2040W25Q128JVSAP1117-33

DribblerESCBoard bill of materials (BOM)

30 components, 16 distinct parts.

QtyPartRefs
1
RP2040
U1
1
~
U2
1
W25Q128JVS
U3
1
AP1117-33
U4
1
12MHz
Y1
1
Conn_01x02
J1
1
Conn_01x03
J2
1
Conn_01x03
J3
1
Conn_01x05
J4
1
Conn_01x02
J5
2
SW_Push
SW1, SW2
2
27p
C1, C2
12
100n
C3, C4, C5, C7, C8, C9, C10, C11 +4
2
1u
C6, C14
1
10k
R1
1
1k
R2

DribblerESCBoard design files

The KiCad project lives in the luhbots/luhsoccer_electronics repository on GitHub; these links point at the commit this page was built from.

DribblerESCBoard: common questions

What microcontroller does the DribblerESCBoard use?

The DribblerESCBoard is built around the RP2040, from the RP2040/RP2350 family.

How big is the DribblerESCBoard PCB?

The DribblerESCBoard measures 27 × 49 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DribblerESCBoard?

30 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the DribblerESCBoard design files?

From the luhbots/luhsoccer_electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DribblerESCBoard design in my own project?

The repository has no license, so all rights stay with luhbots. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DribblerESCBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in luhsoccer_electronics

Similar boards