STM32F4-dev board
LZajmi·STM32F4-dev-board
About the STM32F4-dev board
STM32F4-dev board is an open source STM32 PCB design by LZajmi, published on GitHub. It is a 4-layer board measuring 54 × 65 mm, with 53 components from 37 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the MP2359DJ-LF-Z, USBLC6-2SC6 and BMI270. By type, the board carries 18 capacitors, 13 resistors, 7 connectors, 4 ICs, 4 diodes and 3 inductors.
It belongs with the dev boards & breakouts and sensors designs in this gallery.
From the project
A compact open-hardware development board based on the STM32F4 (ARM Cortex-M4) microcontroller, designed for embedded systems development, prototyping, and sensor-based applications.
A compact open-hardware development board based on the STM32F4 (ARM Cortex-M4) microcontroller, designed for embedded systems development, prototyping, and sensor-based applications.
This board combines a high-performance STM32F4 microcontroller with an onboard BMI270 inertial measurement unit (IMU), enabling motion tracking and orientation sensing.
It is designed as a flexible platform for robotics, control systems, and general embedded development.
Main components on the STM32F4-dev board
STM32F4-dev board bill of materials (BOM)
53 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | MP2359DJ-LF-Z | SOT-23-6 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | BMI270 | XDCR_BMI270 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 10118193-0001LF | AMPHENOL_10118193-0001LF | J2 |
| 2 | CONN_01X04 Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J5 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 2 | TSW-120-24-T-S | SAMTEC_TSW-120-24-T-S | J6, J7 |
| 1 | DC-005 | NINIGI_DC-005 | J8 |
| 1 | 250MA 250mA | Fuse_1206_3216Metric | F1 |
| 1 | C221841 SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | C72041 BLUE | LED_0603_1608Metric | D1 |
| 2 | B5819W | D_SOD-123 | D2, D3 |
| 1 | C2286 RED | LED_0603_1608Metric | D4 |
| 1 | C1017 600 @ 600MHz | L_0805_2012Metric | FB1 |
| 1 | 39N 39n | L_0402_1005Metric | L1 |
| 1 | 10U 10u | IND_SPM6530T-100M-HZ | L2 |
| 1 | 4U7 4u7 | C_0603_1608Metric | C1 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2U2 2u2 | C_0603_1608Metric | C2, C4 |
| 7 | 100N 100n | C_0402_1005Metric | C3, C5, C6, C7, C9, C17, C18 |
| 3 | 10U 10u | C_1206_3216Metric | C8, C14, C15 |
| 1 | 1u | C_0402_1005Metric | C10 |
| 2 | 12P 12p | C_0402_1005Metric | C11, C13 |
| 1 | 10N 10n | C_0402_1005Metric | C12 |
| 1 | 10N 10n | C_0603_1608Metric | C16 |
| 1 | 1K5 1k5 | R_0603_1608Metric | R1 |
| 4 | 2K2 2k2 | R_0402_1005Metric | R2, R6, R12, R13 |
| 1 | 100K 100k | R_0603_1608Metric | R3 |
| 1 | 68K 68k | R_0603_1608Metric | R4 |
| 1 | 10K 10k | R_0402_1005Metric | R5 |
| 1 | 47 | R_0402_1005Metric | R7 |
| 1 | 47K 47k | R_0603_1608Metric | R8 |
| 1 | 15K 15k | R_0603_1608Metric | R9 |
| 1 | 270 | R_0603_1608Metric | R10 |
| 1 | 1k | R_0603_1608Metric | R11 |
STM32F4-dev board design files
The KiCad project lives in the LZajmi/STM32F4-dev-board repository on GitHub; these links point at the commit this page was built from.
STM32F4-dev board: common questions
What microcontroller does the STM32F4-dev board use?
The STM32F4-dev board is built around the STM32F405RGT6, from the STM32 family.
How big is the STM32F4-dev board?
The STM32F4-dev board measures 54 × 65 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the STM32F4-dev board?
53 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F4-dev board design files?
From the LZajmi/STM32F4-dev-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32F4-dev board design in my own project?
The repository has no license, so all rights stay with LZajmi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F4-dev board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k