DrumTime
M-Mrk·DrumTime·pcb/DrumTime.kicad_pcb
About the DrumTime PCB
DrumTime is an open source ESP32 PCB design by M-Mrk, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 120 components from 25 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the ME6210A33PG, TJ-S1608SW6TDSLCCYRGB-A5, IS31FL3236A-QFLS2-TR and TMC2209-LA. By type, the board carries 38 capacitors, 33 LEDs, 27 resistors, 10 connectors, 8 ICs and 2 diodes.
Main components on the DrumTime
DrumTime bill of materials (BOM)
120 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME6210A33PG MICRONE(南京微盟) | SOT-89_L4.5-W2.5-P1.50-LS4.2-BR | U1 |
| 1 | ESP32-S3-WROOM-1-N8 ESPRESSIF(乐鑫) | WIFIM-SMD_ESP32-S3-WROOM-1-N8 | U2 |
| 1 | TJ-S1608SW6TDSLCCYRGB-A5 TOGIALED(统佳) | LED-ARRAY-SMD_4P-L1.6-W0.8-BL-FD | U3 |
| 1 | IS31FL3236A-QFLS2-TR ISSI(北京矽成) | QFN-44_L5.0-W5.0-P0.40-BL-EP | U4 |
| 4 | TMC2209-LA | VQFN-28-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias | U6, U8, U10, U12 |
| 4 | 530470410 Motor MOLEX | CONN-TH_530470410 | CN1, CN2, CN3, CN4 |
| 2 | LED_Conn | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J4, J5 |
| 4 | Hall | JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J6, J7, J8, J9 |
| 1 | Polyfuse | F2920 | F1 |
| 1 | HX-TYPE-C 16P 180 LC-B H13.0 Type-C hanxia(韩下) | USB-C-TH_TYPE-C16PLCH10.0-B143 | USB1 |
| 33 | KT-0603W ~ KENTO | LED0603-R-RD_WHITE | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +25 |
| 1 | USBLC6-2SC6 ST(意法半导体) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D1 |
| 1 | BAT60B R+O(宏嘉诚) | SOD-323_L1.7-W1.3-LS2.6-RD-1 | D2 |
| 6 | 10uF | C_0805_2012Metric | C1, C4, C17, C24, C31, C38 |
| 20 | 100nF | C_0603_1608Metric | C2, C6, C7, C11, C13, C14, C15, C16 +12 |
| 5 | 100uF | CAP-SMD_BD6.3-L6.6-W6.6-FD | C3, C19, C26, C33, C40 |
| 1 | 22uF | C_0805_2012Metric | C5 |
| 2 | 1uF | C_0603_1608Metric | C9, C12 |
| 4 | 22nF | C_0603_1608Metric | C18, C25, C32, C39 |
| 7 | 10kR | R_0603_1608Metric | R1, R5, R10, R15, R19, R23, R27 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GL5528(10-20) GL5528 JCHL(晶创和立) | RES-TH_L5.1-W4.3-P3.40-D0.5 | R2 |
| 5 | 5.1kR | R_0603_1608Metric | R3, R4, R6, R7, R8 |
| 5 | 10R | R_0805_2012Metric | R9, R12, R16, R20, R24 |
| 1 | 15kR | R_0603_1608Metric | R11 |
| 8 | 0.33R | R_1206_3216Metric | R13, R14, R17, R18, R21, R22, R25, R26 |
DrumTime design files
The KiCad project lives in the M-Mrk/DrumTime repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/DrumTime.kicad_pcb
- Schematicpcb/DrumTime.kicad_sch
DrumTime: common questions
What microcontroller does the DrumTime use?
The DrumTime is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How big is the DrumTime PCB?
The DrumTime measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DrumTime?
120 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the DrumTime design files?
From the M-Mrk/DrumTime repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DrumTime design in my own project?
Yes, under the terms of its GPL-3.0 license, which M-Mrk chose for the repository.
Can I test firmware for the DrumTime without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k